Surgident GBR Screw Mini Kit | 45 Screw Holes (SD-SCRMT)

Description

The Surgident GBR Screw Mini Kit is a compact yet complete surgical solution for screw-based fixation of barrier membranes, titanium meshes, and block bone grafts during guided bone regeneration procedures. Organized around 45 screw hole positions arranged by diameter — 1.4 mm, 1.6 mm, and 2.0 mm with lengths from 6 mm to 12 mm — the kit provides a structured selection of fixation screws for varied clinical scenarios in one chairside cassette. A precision driver handle works with three interchangeable tac remover drivers (L 20 mm, L 26 mm, L 52 mm), giving the surgeon length flexibility for both screw insertion during placement and screw removal at re-entry. The strong driver connection grips the screws securely during transfer to the surgical site, eliminating the risk of dropped screws under sterile conditions. Housed in a sterilizable tray with branded SD-SCREW lid.

Key Features

• Compact GBR screw fixation kit for membrane, mesh, and block bone graft stabilization
• 45 organized screw holes arranged by diameter (1.4, 1.6, 2.0 mm) and length (6 to 12 mm)
• Three interchangeable tac remover drivers (L 20 mm, L 26 mm, L 52 mm) for varied surgical access
• Precision driver handle with secure connection for confident single-handed delivery
• Strong driver-to-screw grip eliminates the risk of dropped screws in the surgical field
• Suitable for both screw insertion and screw removal at the re-entry appointment
• Sterilizable tray with branded SD-SCREW lid for organized chairside workflow
• Mini footprint suits clinics needing screw fixation capability without a large augmentation kit

Specifications

• Product Type: GBR Screw Fixation Mini Kit
• Brand: Surgident
• Model Code: SD-SCRMT
• Screw Hole Positions: 45 organized positions
• Screw Diameters Supported: 1.4 mm, 1.6 mm, 2.0 mm
• Screw Lengths Supported: 6 mm, 8 mm, 10 mm, 12 mm
• Driver Lengths: L 20 mm, L 26 mm, L 52 mm
• Driver Handle: Precision handle with secure interchangeable driver connection
• Applications: Membrane fixation, titanium mesh fixation, block bone graft fixation
• Tray: Sterilizable cassette with branded lid and labeled positions
• Sterilization: Autoclavable complete kit

Packaging

• 3 x Tac Remover Driver
• 1 x Driver Handle

Directions for Use

Pre-Surgical Setup

• Open the sterilized SD-SCRMT kit and verify all components are present
• Plan the fixation screw positions based on the case (membrane, mesh, or block bone graft)
• Pre-select screws by diameter (1.4, 1.6, or 2.0 mm) and length (6 to 12 mm) for each fixation point

Site Preparation

• Complete flap elevation and expose the defect requiring augmentation
• Place the bone graft material and trim the barrier membrane or mesh to cover the defect
• For block bone grafts, position and trim the block to the defect site before fixation
• Identify the fixation screw positions around the periphery of the membrane, mesh, or block

Pilot Drilling

• For screws requiring pilot drilling, use the appropriate pilot drill matched to the screw diameter
• Create pilot holes at the planned fixation positions with copious saline irrigation
• Verify pilot hole depth and angulation match the intended screw length and trajectory

Screw Insertion

• Attach the appropriate driver to the precision driver handle by length (L 20, 26, or 52 mm)
• Pick up the chosen fixation screw from the organized tray position
• Engage the driver onto the screw head ensuring secure grip before lifting
• Position the screw perpendicular to the bone at the planned fixation point through the membrane
• Insert under controlled rotation until the screw head sits flush against the membrane with even pressure
• Repeat at each fixation point until the membrane or block is fully stabilized

Verification and Flap Closure

• Confirm the membrane, mesh, or block is firmly fixed with no movement at the screw points
• Verify the bone graft remains contained beneath the membrane without exposure
• Close the soft tissue flap with tension-free primary closure over the fixed augmentation
• Suture per the planned protocol and provide post-operative instructions

Screw Removal at Re-Entry

• At the re-entry appointment, expose the augmented site with a flap reflection
• Select the appropriate driver length (L 20, 26, or 52 mm) based on access
• Engage the driver onto each screw head and unscrew under controlled reverse rotation
• Proceed with implant placement or further prosthetic planning as per the case

Post Use Care

• Return all instruments to their designated positions in the tray after the procedure
• Clean each instrument thoroughly and inspect for damage before sterilization
• Sterilize the complete kit via autoclave following the recommended protocol
• Store the closed sterilized kit in a clean dry environment ready for the next case

Additional Information

Country of Origin: South Korea

Manufacturer:
Surgident Co., Ltd.
1F & 2F, 423-7 Hyeoksin-daero, Dong-gu, Daegu 41059, Republic of Korea
Phone: +91 72899 99456

Packer:
Surgident Co., Ltd.
1F & 2F, 423-7 Hyeoksin-daero, Dong-gu, Daegu 41059, Republic of Korea
Phone: +91 72899 99456

Importer:
Vasa Denticity Ltd.
Khasra No. 15/1, Mustil No. 6, Village Dabodha, Farukhnagar, Gurugram, Haryana ,122506, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product.