Waldent Eco LED Airotor And Cartridge

Description

Waldent Eco LED Airotor (W-111) is a high-quality dental handpiece designed for optimal user comfort and patient care. With a total length of 12.5cm, the handpiece boasts a head size of Ø11mm x H14mm, ensuring precision and maneuverability. The specially designed head contributes to enhanced visibility in challenging areas, streamlining procedures with greater accuracy. The Eco-nomical technique facilitates easy access to hard-to-reach places, reducing procedural times. With low vibration and noise, this innovative Airotor cartridge ensures a comfortable experience for both professionals and patients. Suitable for E-type headpieces following ISO standards, it is versatile and compatible with both steam and chemical autoclave methods. The Waldent Eco LED Airotor represents a balance of cutting efficiency, durability, and user-friendly design for efficient dental clinical treatment and prevention. Please note that the cartridge is exclusively compatible with the Waldent Eco LED Airotor.

INDICATIONS:

• Intended for dental clinical treatment and prevention
• Suitable for any E-type headpiece accords with ISO standard
• Suitable for both steam and chemical autoclave

Please Note: This cartridge is compatible with Waldent Eco LED Airotor only.

Key Features

• Exclusive Eco Design
• Push Button Air-rotor
• Super high-speed air-rotor
• Optimal power
• Optimum cooling of the treatment site with 3x spray
• 3 x Holes in Air-Rotor Head:3 holes in the air-rotor head have been equipped to increase the cooling effect for the tooth.

Specifications

• TECHNICAL SPECIFICATIONS

  Rotation speed	320,000rpm -450,000rpm
  Working air pressure	<0.25Mpa
  Water Spray	Triple Hole Water Spray
  Bur applicable size	1.590-1.600 mm ISO standarised burs
  Noise	≤ 60 dB
  Head standard	LED Supertorque
  Chuck bur	Push Button
  Bearing	Ceramic Bearing

Waldent Eco LED Airotor (W-111)

• Head Size: Ø11 mm X H14mm
  Total Length: 12.5cm

Packaging

Waldent Eco LED Airotor

• 1 x Waldent Eco LED Airotor
• 1 x Key
• 1 x Manual

Waldent Eco Airotor Cartridge

• 1 x Waldent Eco Airotor Cartridge

Directions for Use

• Ensure cleanliness: Before using the cartridge, make sure it is clean and free from any debris or contaminants. Follow recommended cleaning procedures provided by the manufacturer.

• Cartridge compatibility: Confirm that the Waldent Eco Airotor Cartridge is compatible with the specific model of the Waldent Eco LED Airotor handpiece. Verify that the cartridge fits securely and properly into the handpiece.

• Insert the cartridge: Align the cartridge correctly with the handpiece and insert it firmly until it locks into place. Ensure that it is properly seated and securely attached to the handpiece.

• Sterilization considerations: If the cartridge has not been sterilized, it should undergo proper sterilization according to the recommended methods, such as steam or chemical autoclaving. Follow the manufacturer’s guidelines for sterilization procedures.

• Handpiece connection: Connect the Waldent Eco LED Airotor handpiece, with the cartridge inserted, to the air tubing of the dental unit. Ensure a secure and proper connection between the handpiece and the air source.

• Adjust air pressure: Set the air pressure to the recommended level based on the manufacturer’s instructions and the specific procedure being performed. Use the dental unit’s control panel or air pressure adjustment knob to make the necessary adjustments.

• Perform the dental procedure: Hold the handpiece comfortably in your hand and use it according to the specific dental procedure being performed. Follow proper techniques and guidelines for each procedure to ensure accurate and precise treatment.

• Monitoring and maintenance: Monitor the performance of the handpiece and cartridge during the procedure. If there are any issues, such as increased noise or decreased cutting efficiency, refer to the troubleshooting section of the product documentation or contact an authorized Waldent representative for assistance. After completing the procedure, follow the manufacturer’s instructions for cleaning and maintenance of the handpiece and cartridge.

Additional Information

• Country of Origin: Made in PRC

Warranty & Service

• Manufacturer/Importer warranty of 3 Months as applicable for this product
• Service and Warranty are handled by the manufacturer/importer directly for this product
  
• Dentalkart will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
• Dentalkart and the Buyer acknowledge that the Products purchased/used are a subject matter of original Manufacturer/Importer’s warranties only
• Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Dentalkart may assist the customer in registering a request to get the Product replaced or serviced. 
• The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.