Waldent PhysioDrive Implant Motor (WIMU101)

Description

Key Features

Specifications

Technical specifications

Host:

• Power supply frequency: 50/60Hz
• Input power: 150VA
• Dimension: 286mmx252mmx113mm
• Weight: 4.35Kg
• Rotating speed range: 200-40000rpm
• Torque: 5-80Ncm (Speed ratio: 20:1)

Motor:

• Input voltage: DC30V
• Dimension: 21.5mmx108mm
• Tail cord length: 1.8m
• Foot pedal controller
• Tail cord length: 1.8m

Foot Pedeal Controller:

• Tail cord length: 2.0m

Packaging

• 1 x Control Unit
• 1 x 20:1 Contra handpiece
• 1 x Handpiece holder
• 1 x Foot Pedal Handle
• 1 x Foot Pedal
• 1 x Infusion Bracket
• 1 x Motor
• 1 x Power Cord
• 2 x Irrigation Tubes
• 1 x Screwdriver
• 2 x Screw
• 1 x Fuse
• 8 x O Ring
• 5 x Pipe Clip
• 1 x Handle Circlip
• 1 x Aluminium Case

Directions for Use

1. Preparation:

• Ensure that the dental implant motor is properly set up and connected to a power source with the correct voltage (AC100-120V/200-240V) and frequency (50/60Hz).
• Connect the handpiece motor and foot pedal controller to the corresponding ports on the main unit.
• Confirm that the LED light on the handpiece motor is functional.
• Prepare the necessary handpieces, drills, and instruments for the specific dental procedure.

2. Power On:

• Turn on the dental implant motor using the power button or switch.
• Ensure that the touch screen interface is responsive and displays the main menu.

3. Select Procedure Mode:

• Use the touch screen to select the appropriate procedure mode from the available options (e.g., implantation, restoration, extraction of impacted teeth, orthopedic surgery).

4. Adjust Settings:

• Customize the settings for the selected procedure mode, such as speed, torque, and water volume. Use the touch screen to make these adjustments.
• If needed, change the handpiece and contra-angle attachment to match the requirements of the procedure.

5. Positioning:

• For accurate positioning, use the positioning drill to mark and locate the implant site on the alveolar bone.

6. Drilling:

• Utilize the dental implant motor to drill holes as per the planned procedure. The system can assist in hole-drilling direction, depth, and diameter.

7. Tapping (if necessary):

• If required, use the system’s tapping function to create threads on the hole to match the implant.

8. Implantation:

• Gently implant the dental implant into the prepared hole on the alveolar bone.

9. Locking Abutment Screw (if applicable):

• If an abutment screw is part of the procedure, screw it onto the dental implant using the appropriate handpiece attachment.

10. Monitoring and Adjustments:

• Continuously monitor the procedure on the touch screen interface, making any necessary adjustments to speed, torque, or water volume as needed.

11. Cleaning and Sterilization:

• After completing the procedure, ensure that all components, especially the handpiece motor, are properly cleaned and sterilized according to recommended protocols.

12. Power Off:

• Turn off the dental implant motor and disconnect it from the power source when the procedure is finished.

Warranty & Service

• Manufacturer/Importer warranty of 1 Year is applicable for this product.
• Service and Warranty are handled at the manufacturer’s discretion.
• Dentalkart will be liable to replace any faulty or unsatisfactory products.
• Dentalkart will provide guaranteed assistance to the customer in registering a request to get the products replaced or serviced.
• The Buyer acknowledges that the Products once sold will be exchanged or taken back only if the seal of the package or the Product is intact or unaltered or is not tampered with.