Pyrax Cold Mould Seal

Description

Pyrax Cold Mould Seal is a high-performance separating solution designed as an effective alternative to tin foil for dental laboratories. This versatile product creates a reliable barrier between stone plaster and acrylic resin, preventing adhesion during the acrylic processing of dentures.

The solution forms a uniform film thickness that allows for precise adaptation of acrylic resin to the model, minimizing distortion and ensuring an accurate fit. Its pink color emulsion makes application easy and visible, while its quick-drying formula ensures a durable, non-stick surface for effortless removal of the final product from the mold.

Pyrax Cold Mould Seal’s ease of use and consistent results enhance the quality and efficiency of dental prosthetic work, providing dental technicians with a dependable tool for achieving clean and precise separations.

Key Features

• Designed to prevent dentures from sticking to the stone during acrylic processing, ensuring a smooth and clean separation without compromising the quality of the prosthetic work.
• The pink color of the emulsion allows for easy visibility during application, helping to ensure even coverage and effective separation.
• Pyrax Cold Mould Seal dries rapidly, creating a durable, non-stick surface that simplifies the removal of the final product from the mold and improves overall efficiency.
• Suitable for both packing/pressing techniques and cast molding processes, making it a versatile tool for various dental prosthetic procedures.
• Its user-friendly nature allows for straightforward application with minimal effort, and the dry, non-stick surface ensures easy removal of the final product.

Specifications

• Category: Dental Laboratory materials 
• Type: Seperating medium 
• Composition: Alginate and excipients 
• Volume: Available as
  • 100ml 
  • 4Ltr
• Shelf Life: 3 years 

Packaging

Pyrax Cold Mould Seal 110ml

• 1 x 100ml Bottle

Pyrax Cold Mould Seal 4 Ltr

• 1 X 4 Ltr Bottle

Directions for Use

• Prepare the Surface: Ensure the mold or surface where the Pyrax Cold Mould Seal will be applied is clean and dry to achieve optimal adhesion.

• Apply a Thin Layer: Using a brush or applicator, apply a thin, uniform layer of Pyrax Cold Mould Seal to the desired surface. A thin application ensures effective separation and prevents sticking.

• Allow to Dry: Let the applied Mould Seal dry completely before moving on to the next step. While exact drying times may vary, ensure the seal is fully dried to create a reliable barrier.

• Packing/Pressing or Cast Molding: Pyrax Cold Mould Seal is suitable for both packing/pressing techniques and cast molding. Follow the specific procedures for your application to achieve the best results.

• Separation: The Mould Seal provides an impeccably clean and accurate separation between the mold and acrylic or plaster, with a uniform thickness that ensures easy and precise separation under pressure.

• Repeat as Needed: If necessary, reapply a thin layer of Pyrax Cold Mould Seal to maintain effective separation throughout the dental procedure.

Additional Information

Country of Origin: India

Manufacturer:
Pyrax Polymars
, 2nd Floor, Shri Ram Plaza, Near Ram Nagar Chungi, Labour Chowk, Ramnagar, Roorkee 247667, Uttarakhand, India
Phone: +91 72899 99456

Packer:
Pyrax Polymars
, 2nd Floor, Shri Ram Plaza, Near Ram Nagar Chungi, Labour Chowk, Ramnagar, Roorkee 247667, Uttarakhand, India
Phone: +91 72899 99456

Marketed By:
Pyrax Polymars
, 2nd Floor, Shri Ram Plaza, Near Ram Nagar Chungi, Labour Chowk, Ramnagar, Roorkee 247667, Uttarakhand, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product