MELAG MELAdest 65 Water Distiller

Description

The MELAG MELAdest 65 Water Distiller is a robust and efficient device designed for the fast and economical production of high-quality distilled water. Operating on the principles of traditional water treatment, this distiller heats water to its boiling point of 100°C, effectively separating contaminants and impurities which remain in the boiling chamber. Meanwhile, steam rises through a specialized cooling coil system located in the upper section of the device. As the steam cools and condenses, it transforms into purified distilled water, devoid of chemicals, salts, and other contaminants. This process ensures the production of water of the highest quality, suitable for critical applications in medical, dental, and laboratory settings where purity is essential.

Indications:

• Distilling water for dental procedures
• Producing purified water for medical applications
• Suitable for laboratories requiring high-quality distilled water

Key Features

• Efficient Distillation: Produces approximately 1 liter of high-quality distilled water per hour.

• Compact and Lightweight: Dimensions of 38 cm height and 23 cm diameter; weighs 4.2 kg when empty.

• High Purity: Distilled water conductivity of 2-3 µS/cm for medical and laboratory applications.

• Durable Construction: Stainless steel boiling chamber and glass flask ensure longevity.

• User-Friendly: Includes user manual and essential accessories for easy setup and operation.

Specifications

• Device Type: MELAdest 65
• Height: 38 cm
• Diameter: 23 cm
• Dimensions of Glass Flask (Ø x H): 18 x 18.3 cm
• Weight: 4.2 kg
• Capacity: Approx. 1 liter per hour
• Conductivity of Distilled Water: 2-3 µS/cm
• Power Supply: 230 V, 50/60 Hz
• Max. Electrical Power: 800 W

Packaging

• 1 x MELAG MELAdest 65 Water Distiller
• 1 x User Manual
• 1 x Power Cable
• 1 x Glass Flask
• 1 x Plastic Guard Ring
• 1 x Adapter Cover
• 1 x Spout Cover
• 1 x Holder for Adapter Cover
• 1 x Holder for Spout Cover

Directions for Use

Steps To Use:

• Remove the storage bottle from the inside of the water distiller.
• Fill the tank inside the machine’s body up to the highest water level line be very careful not to overfill the tank. (time needed to distill water can be reduced by using already boiled water)
• Place the top cover onto the machine’s body, ensuring the silicone seal is correctly placed around the entire rim. Check to make sure the unit is on a stable surface. Then connect the power cord from the top cover to the machine’s body.
• Set up storage bottle as per diagram I. Connect the power cord to the power outlet.
• Press the “Reset Button”. The fan will come on automatically and the tank will begin to heat, thus starting the distilling process.
• Water will drip into the storage bottle after approximately 30 minutes. It will take approximately 4 hours to distill 4 liters of water. The unit will automatically shut down when the cycle has finished.
• Do not use the first bottle of distilled water. It will take one distilling cycle for the unit to ‘self-clean/. Wipe out the tank and rinse/discard water in the storage bottle. The distiller is now ready to create distilled water.

Cleaning:

Rinse and wipe out the tank every day using clean water. Calcification and scale will build up on the bottom of the tank and should be removed every two weeks. Use the following instructions:-

• Pour in enough hot water to cover the scale in the tank.
• Pour 1-4 teaspoons into the tank depending on the amount of scale.
• Leave the lid off the unit and start up a cycle by pushing the “Reset Button”.
• Let the cycle run for 30 minutes, pour out the water, and wash the inside of the tank with clean water.
• If the scale is not completely removed repeat the process,
• Replace the carbon bag in the nozzle every 3 months. Fibre Plus

Please Note:

• Use the unit in a dry, well-ventilated area.
• Keep the body of the unit dry only fill it with water using a jug
• “Reset Button” will begin the distilling cycle and the unit will automatically turn itself off when the cycle is finished. To stop the unit mid-cycle turn off the power switch.
• Leave the power cord unconnected when the unit is not in use.
• Do not immerse any part of the unit in water
• Do not remove the cover whilst the unit is mid-cycle. Wait until the unit has cooled down before removing the top.
• The unit must be allowed to cool down before starting another distilling cycle. (This will prevent injuries from scalding water and prolong the life of the Distiller).

Warranty & Service

• Manufacturer/Importer warranty of 1 year as applicable for this product.
• Service and Warranty are handled by the manufacturer/importer directly for this product
• Dentalkart will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
• Dentalkart and the Buyer acknowledge that the Products purchased/usedare a subject matter of original Manufacturer/Importer’s warranties only
• Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Dentalkart may assist the customer in registering a request to get the Product replaced or serviced. 
• The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.