Waldent Flexident Light Body Cartridges ( 50ml x 2)

Description

Waldent Flexident A-Silicone

Flexident Light Body is a Addition Cured (A-silicon) vinyl Polysiloxane impression material. Look forward to high precision work owing to Flexident’s high hydrophilicity, great linear dimensional stability, and excellent tear resistance.

It is a high precision silicone, non-slumping & thixotropic in nature which is easy to work with and trim. It has high initial hydrophilicity & viscosity.

It gets pushed into the sub-gingival area easily to register the details. Flexident exhibits the highest tear strength to give an accurate impression detail everytime.

Key Features

• Exhibits pseudo-plastic properties for precision which is not found in alginates
• Superior tear strength than any other VPS material
• Better dimensional stability – multiple models can be poured up to two weeks
• Good hydrophilicity
• Compatible with gypsum products
• Superior wetting characteristics ensuring gypsum working cast is hard with smooth surface
• Can be subjected to cold sterilization without compromising the details and dimensional stability of the impression
• Better reproduction detail.

Specifications

Flexident – Light Body

• Working Time : 2 min
• Intraoral Setting Time : 3 min 30 sec

Packaging

• 2 x Base/Catalyst 50ml
• 6 x Mixing Tip 

Directions for Use

Flexident Light Body:

1. Pull off the cartridge plug and discard it

2. Eject a small amount of material directly out of the cartridge onto a paper towel/tissue held in your hand. Extrude enough material until it is evident that base and catalyst are being ejected. This ensures proper mixing

3. Immediately wipe the cartridge orifice to remove excess material

4. Attach the selected mixing tip to the cartridge and twist a ¼ turn clock-wise (90°) to lock it in place

5. Push the Oral Tip firmly onto the Mixing Tip

6. Squeeze the trigger with a smooth, steady force to mix and dispense material. Avoid abrupt movements. Release the trigger to stop the flow.

Recommendations for use

Double mix technique

While loading the tray, the dentist may begin to apply the washmaterial around the preparation. Tray loading and application of wash-material around the preparation have to be completed at thesame time. Keep the oral tip immersed in the material at all times to avoid trapping air. Immediately place filled tray into the patient’s mouth. Press for 2 –3 s and hold in position until the material is completely set

Additional Information

Country of Origin: Türkiye

Manufacturer:
Inci Dental Tibbi Malz. San. ve Tic. Ltd. ?ti.
Defterdar Mah., Otakç?lar Cad., E Blok Sit. No. 74/4, Eyüpsultan, Istanbul, Türkiye
Tel: +90 212 632 6345

Packer:
Inci Dental Tibbi Malz. San. ve Tic. Ltd. ?ti.
Defterdar Mah., Otakç?lar Cad., E Blok Sit. No. 74/4, Eyüpsultan, Istanbul, Türkiye
Tel: +90 212 632 6345

Marketed & Imported By:
Vasa Denticity Ltd.
Khasra No. 15/1, Mustil No. 6, Village Dabodha, Farrukhnagar, Gurugram, Haryana – 122506, India
Phone: +91 72899 99456