Life Dental & Clinical Autoclave ST911EPT 12 Litres (Blue) with Drum (8 x 8 inches)

Description

Autoclaves provide a physical method for disinfection and sterilization.
Autoclaves operate at high temperatures and pressure in order to kill microorganisms and spores.
They are used to decontaminate certain biological waste and sterilize media, instruments, and labware.

Key Features

• All Aluminum deep-drawn Seamless construction.
• Stylish, Light, Compact, Portable Easy to use top loading autoclaves.
• Easily operate anywhere, anytime.
• Equipped with Two stages “Over Pressure” protection system incorporating a calibrated continuous bleeding pressure Stopcock and Pressure release weight valve.
• Extended life Sealing Gasket. 
• Equipped with 1hr. Rotary timer.
• Customized designed Heating Element for better efficiency & longer life.
• Color-coded Pressure Gauge shows internal chamber condition during the cycle.
• Equipped with Heat resistant handles and steam release/control valve.
• For assurance of quality, each Autoclave is tested to the parameter of successful sterilization.
• Optional ‘TST’ indicator stickers provide independent verification that the correct combination of Temperature, Steam & Time has been achieved for successful sterilization.

Specifications

Technical Specs:

• Cat No.: ST911EPT
• Model: Electric with Rotary Timer 
• Finish: Epoxy Powder coated [Available in Different Color]
• Vol. Capacity: 10 litres
• Power supply: 220V.
• Wattage: 1000W.

Sterilization Pressure & Temperature:

• Sterilizing Temperature: 121 degrees Celsius. [Preset]
• Operating Pressure: 15 psi. [Preset]

 Accessories with Autoclave.

• Outer MS Stand
• Inner Tripod Stand 
• Dressing Drum 
• Power Cable

Packaging

1 UNIT

 Accessories with Autoclave.

• Outer MS Stand
• Inner Tripod Stand 
• Dressing Drum
• Power Cable

Directions for Use

Laboratory personnel should observe the following autoclave procedure when loading the unit:
Loosen the lids on any containers being loaded into the autoclave and ensure that any bags are not tied shut or otherwise sealed. Steam-penetrable bungs may be used.
Empty glassware or other containers that do not need to be sealed should be placed on the side or upside-down to prevent air pockets from forming.
Any goods containing liquid should be placed in a secondary containment pan made of an autoclave-safe material. The pain should be large enough to contain a total spill of
all the liquid contents.
Load all goods in such a way that there is as much space between each item as possible. Make sure that nothing is touching the sidewall or bottom floor of the autoclave,
and that the drain at the bottom is free from blockage.
Ensure that there is a metal strainer present in the drain of the autoclave and that that strainer is free and clear of debris. If it is clogged, the strainer should be removed,
cleaned, and put back in place before running the autoclave cycle.
Do not overload the autoclave; it’s important that there be sufficient room for steam to circulate through the entire chamber.
Most autoclaves are equipped with metal wire rack shelves. When loading goods into this type of autoclave, place all items in such a way that they are easily accessible
from the autoclave door, without having to lean into the autoclave itself or against any piece of metal on the side.
Carefully observe protocol for sharp or biohazardous material for your laboratory when loading the autoclave.

Additional Information

Country of Origin: India

Manufacturer:
Life Steriware
77A/18, Dilshad Garden Industrial Area,
Delhi – 110095, India
Phone: +91 72899 99456

Packer:
Life Steriware
77A/18, Dilshad Garden Industrial Area,
Delhi – 110095, India
Phone: +91 72899 99456

Warranty & Service

• Manufacturer/Importer warranty of 1 year as applicable for this product.
• (NO WARRANTY on Gas Kit , Timer, Coil & Element)
• Service and Warranty are handled by the manufacturer/importer directly for this product
• Dentalkart will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
• Dentalkart and the Buyer acknowledge that the Products purchased/used are a subject matter of original Manufacturer/Importer’s warranties only
• Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Dentalkart may assist the customer in registering a request to get the Product replaced or serviced. 
• The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.