Ivoclar Tetric N-Ceram Dentin Shade B2

Description

Tetric N-Ceram Dentin Shade B2

Key Features

• Nano-hybrid technology for esthetic restorations
• High radiopacity for secondary caries diagnosis
• Universal application for anterior and posterior teeth
• Chameleon effect for natural esthetic results
• Suitable for various restorative procedures
• Reliable adhesion with Tetric N-Bond
• Easy handling and sculpting capabilities
• Exceptional polishing and finishing results
• Long-lasting, durable restorations for patient satisfaction

Specifications

Ivoclar N Etchant Gel

• Phosphoric Acid Content: 37 wt.% in water
• Storage Temperature: 2-28 °C (36-82 °F)
• Recommended Refrigeration: 2-8 °C (36-46 °F)
• Application Type: Gel

Ivoclar Tetric N-Ceram Enamel Shade

• Inorganic Fillers Content: 55-57 vol%
• Particle Size of Inorganic Fillers: 40 nm – 3000 nm
• Storage Temperature: 2-28°C (36-82°F)
• Shade: Enamel

Ivoclar Applicators Refill

• Handle Adjustability: Handle can be broken to adjust the length
• Disposable: Yes, single-use, disposable microbrush applicators
• Solvent Resistance: Resistant to common solvents used in dental materials
• Tip Flexibility: Tips can be bent into any angle for precise material placement in limited access areas

Ivoclar Tetric N Ceram Intropack with Tetric N-Bond 6g

• Technology: Nano-hybrid technology
• Type: Light-curing dental restorative
• Radiopacity: 400% Al (for radiographic detection)
• Wear Resistance: Low wear, high strength

Ivoclar Tetric N-Bond

• Composition: Phosphoric acid acrylate, HEMA, Bis-GMA, urethane dimethacrylate, ethanol, film-forming agent, initiators, and stabilizers
• Storage Temperature: 2-28°C (36-82°F)
• Chemical Components: Phosphoric acid acrylate, HEMA, Bis-GMA, urethane dimethacrylate, ethanol, initiators, stabilizers

Packaging

Ivoclar Tetric N-Ceram Enamel Shade A1

• 1 x 3.5g syringe

Ivoclar Tetric N-Ceram Enamel Shade A2

• 1 x 3.5g syringe

Ivoclar Tetric N-Ceram Enamel Shade A3

• 1 x 3.5g syringe

Ivoclar Tetric N-Ceram Enamel Shade B1

• 1 x 3.5g syringe

Ivoclar Applicators Refill

• 50 x Applicators

Ivoclar Tetric N Ceram Intropack with Tetric N-Bond 6g

• 4 x 3.5 G Tetric N-Ceram (A1. A2. A2. A3)
• 1 x 2 G N-Etch
• 1 x 6 G tetric N-Bond
• 1 x Applicator Pack

Ivoclar Tetric N-Bond

• 1 x 6gm Bottle

Ivoclar Tetric N-Ceram Dentin Shade B2

• 1 x 3.5g syringe

Ivoclar Tetric N-Ceram Bleach I Shade

• 1 x 3.5g syringe

Directions for Use

Preparation: 

• Ensure that you have all the necessary equipment and personal protective gear (gloves, mask, eyewear) ready.
• Prepare the tooth or teeth to be restored by removing any decay or existing restorative material.
• Clean and isolate the working area using a rubber dam or cotton rolls to prevent contamination.

Etching and Bonding:

• Apply Ivoclar N-Etch Gel to the enamel and dentin surfaces as directed. Follow the manufacturer’s instructions for etching and conditioning times.
• Rinse the etching gel thoroughly and dry the prepared tooth surface with a gentle stream of air, leaving it slightly moist.
• Apply Tetric N-Bond to the tooth surface.

Restorative Procedure:

• Open the Ivoclar Tetric N-Ceram Composite Kit and select the appropriate shade of composite material based on the patient’s needs and the clinical situation.
• Use the provided applicators or instruments to handle the composite material. Tetric N-Ceram Composite can be used for various restorative procedures, including class I-V restorations, veneers, fissure sealing, etc.
• Place and shape the composite material in the prepared tooth cavity or on the tooth surface. Sculpt the material to achieve the desired anatomy and esthetics.
• Light cure the composite material using a dental curing light.

Finishing and Polishing:

• After curing, use appropriate dental instruments to contour and shape the restoration to mimic natural tooth morphology.
• Polish the composite using fine-grit finishing and polishing materials to achieve a smooth, esthetic surface.

Final Inspection and Patient Care:

• Examine the restoration for any imperfections, rough spots, or occlusal interferences.
• Adjust the occlusion if necessary for proper alignment with opposing teeth.
• Provide post-operative instructions to the patient regarding care, oral hygiene, and any potential discomfort.

Post-Operative Follow-Up:

• Schedule a follow-up appointment to assess the restoration’s integrity and the patient’s comfort.
• Advise the patient on routine dental check-ups to ensure the long-term success of the restoration.

Additional Information

Country of Origin: Liechtenstein

Manufacturer:
Ivoclar Vivadent AG
Bendererstrasse 2, 9494 Schaan, Liechtenstein

Packer:
Ivoclar Vivadent AG
Bendererstrasse 2, 9494 Schaan, Liechtenstein

Imported By:
Ivoclar Vivadent India Pvt. Ltd.
Ground Floor and 1st Floor, Khandsa Village, Gurugram, Haryana, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product