Diadent EvoFill Gutta Percha Cartridges

Description

DiaDent Gutta percha cartridges that feature a more flexible and longer needle to navigate canal curvatures that reach the canal apex more easily. This needle is better for heat conductivity, which will ensure a more consistent flow of liquid gutta percha for denser fills. Cartridge design also allows for more gutta percha to be expressed from the cartridge, decreasing waste.

Pre-loaded, single-use gutta percha cartridges for EvoFill motorized backfill obturation system. No cleaning necessary, fast loading and hygienic, with bendable tip (23 gauge) and excellent flowability.

Key Features

• Fast loading
• Single-use
• Hygienic
• Bendable tip
• Excellent flowability

Specifications

• Composition – Gutta Percha
• Tip – Bendable
• Disposable/Non Disposable – Disposable

Packaging

• 20 x Gutta Percha Catridges in a box

Directions for Use

1. Insert the Gutta Percha Cartridge (EvoFill). 

• Insert the Gutta Percha Cartridge (EvoFill) into the handpiece and turn the cartridge nut clockwise to securely connect the two parts. Turn counterclockwise to release Gutta Percha Cartridge (EvoFill).
• Put on the EvoFill Safety Cap at the front part of the device.
• Bend the tip part of the Gutta Percha Cartridge (EvoFill) using the Multi-Tool provided

2. Turn on the device

• Press and hold the power button to turn on the device. It automatically starts to preheat to the selected temperature.
• If the initial heating temperature is low, preheat Gutta Percha at a higher temperature for a short time to soften it quickly.
• The temperature indicator flashes when the device is preheating and stops flashing with an audible alert when preheating is complete.

3. Obturating (Backfill)

• Fit the master Gutta Percha cone that is dipped in sealer and take a radiograph to ensure that it is fitting well.
• Increase the preset temperature of EvoFill, so the Gutta Percha inside the cartridge is heated.
• Using EvoFill’s tip, make contact with the upper part of Gutta Percha Point that is already filled in the root canal, transfer heat for 3 to 5 seconds.
• Extrude the melted Gutta Percha Obturator to the root canal and continue extruding while withdrawing the tip from the canal.
• Use an Endodontic hand plugger to compact obturation material. Repeat as needed until canal is filled without voids and take a radiograph

Additional Information

Country of Origin: South Korea

Manufacturer:
DiaDent Group International
16, Osongsangmyeong 4-ro, Osong-eup, Heungdeok-gu, Cheongju-si, Chungcheongbuk-do – 28161, South Korea

Packer:
DiaDent Group International
16, Osongsangmyeong 4-ro, Osong-eup, Heungdeok-gu, Cheongju-si, Chungcheongbuk-do – 28161, South Korea

Imported & Distributed By:
Dental Avenue (I) Pvt. Ltd.
28-B, Udyog Vihar, Phase V, Gurugram, Haryana – 122016, India

Warranty & Service

• Warranty is not applicable for this product.