Dentsply Prime & Bond Universal (4ml)

Description

Key Features

• Active moisture control – Reliable bonding performance, no matter if the dentin is still too wet or already too dry – for virtually no post-operative sensitivity. 
• Active cavity spreading – Actively spreads in the cavity and helps to cover all cavity surfaces.
• Self levelling – The adhesives self-levels to form a smooth and uniform adhesive layer, helping to avoid dry spots or adhesive pooling. 
• Low film thickness – Adhesive pools can show up as translucent areas on a radiograph, which can easily be misdiagnosed as a void. Thick adhesives may also change crown prep geometry impacting crown fit.

Specifications

• Versatility: It can be used with all etching methods and for all indications, making it suitable for a wide range of dental procedures.
• Reliable performance: It demonstrates reliable bonding performance even on dentin that is overly wet or dry, ensuring consistent results.
• Minimal post-operative sensitivity: The adhesive formulation minimizes the risk of post-operative sensitivity, providing comfort to the patient after the procedure.
• Low film thickness: The adhesive has a low film thickness, reducing the chances of pooling and misfit of the restoration, which can compromise the final result.
• Extended working time: Prime & Bond Universal remains usable for 30 minutes in a closed CliXdish, providing a relaxed working time and reducing waste.
• High initial bond strength: When used with Calibra Ceram cement for indirect restorations, it offers high initial bond strength, ensuring the longevity of the restoration.
• Free of certain chemicals: The patented formulation of Prime & Bond Universal is free of HEMA (2-hydroxyethyl methacrylate), TEGDMA (triethylene glycol dimethacrylate), or bisphenol, addressing concerns related to these substances.

Packaging

• 1 x 4ml Bottle

Directions for Use

• Prepare the tooth surface according to the specific dental procedure.
• Ensure that the tooth surface is clean and free from debris.
• Apply an appropriate etching method based on the indication and follow the manufacturer’s instructions.
• Rinse the etchant thoroughly and dry the tooth surface gently using oil-free, moisture-free air.
• Shake the bottle of Prime & Bond Universal adhesive well before use.
• Dispense a small amount of the adhesive onto a disposable mixing well or other suitable containers.
• Apply a thin, even layer of Prime & Bond Universal adhesive to the prepared tooth surface using an applicator or brush.
• Ensure complete coverage of the surface, including dentin and enamel.
• Allow the adhesive to dwell on the tooth surface for the recommended time as specified by the manufacturer.
• Use gentle air pressure or a gentle stream of oil-free, moisture-free air to evaporate the solvent and water from the adhesive layer.
• Do not over-dry the adhesive; a slightly moist surface is desirable.
• Proceed with the placement of the restorative material according to the specific procedure.

Additional Information

• Country Of Origin: Germany
• Manufacturer: Dentsply
  

  Warranty & Service

  • Warranty is not applicable for this product.