3M ESPE Filtek Z250 Xt Restorative Syringe – A2

Description

3M™ ESPE™ Filtek™ Z250XT Universal Restorative is the solution for your everyday restorative needs.

Filtek™ Z250XT Nano Hybrid restorative offers the handling dentists prefer.

For decades, 3M ESPE has worked to continually improve and perfect handling from the dentist’s point of view. Filtek™ Z250XT restorative will make your work go smoothly. The expected results are now easy to achieve.

Formulated for strong, reliable performance.

With Filtek™ Z250XT restorative, you can satisfy patient expectations for a natural-looking, high quality restoration. Nanohybrid formulation resulted in high flexural strength, diametral tensile strength, wear resistance and improved polish retention. When you place Filtek™ Z250XT restorative, you can trust in a reliable outcome.

Easy to use in all classes of direct restorations.

Our nanohybrid is designed to be easy to use, whether creating anterior or posterior restorations. With 12 popular shades that match the Vita® Classical Shade Guide, you’ll find it easy to match the patient’s natural teeth. Filtek™ Z250XT restorative is formulated for strong performance and is easy to polish – so you can count on predictable, reliable, patient-pleasing results in any indication.

A new 3M ESPE nanohybrid that’s even better at meeting daily restorative needs.

Building on the success of Filtek™ Z250XT Nano Hybrid Universal Restorative, we incorporated our proven nanofiller technology to improve physical properties and give the restoration a surface that is easier to polish for good aesthetic results. The next generation – Filtek™ Z250XT Nano Hybrid Universal Restorative offers a great value as a versatile restorative you’ll use every day.

Key Features

• Easy to sculpt and holds its shape prior to cure
• Handles better than other nanohybrid composites
• Does not slump 
• Does not stick to the composite instruments hence is easy to adapt
• Predictable esthetics
• High stregth 
• Good wear resistance

Specifications

Packaging

• 1 x 3g Syringe

Directions for Use

Preparation:

• • Clean teeth with pumice and water.
  • Select the appropriate shade by evaluating the tooth’s gingival, body, and incisal areas.
  • Use a mock-up to test the shade match.

Isolation:

• • • Use a rubber dam or cotton rolls with an evacuator for isolation.

Direct Restorations:

• • • • Cavity Preparation:
        • Clean and round cavity; remove residual materials.
      • Pulp Protection:
        • Apply calcium hydroxide and a light-cure glass ionomer liner if needed.
      • Matrix Placement:
        • Use Mylar strips or matrix bands for anterior and posterior restorations.
      • Adhesive System:
        • Follow instructions for etching, priming, and adhesive application.

• Dispensing:

  • For syringes: Turn the handle clockwise to dispense, then counterclockwise to stop flow and cap the syringe.

• Placement:

  • Apply composite in increments, overfill slightly, and contour with composite instruments.

• Curing:

  • Cure each increment with a high-intensity light (400 mW/cm²). Follow recommended exposure times based on shade.

• Finishing:

  • Contour with fine diamonds or burs. Use finishing strips for proximal surfaces.

• Adjust Occlusion:

  • Check and adjust occlusion with articulating paper and fine diamonds.

• Polishing:

  • Polish with the Sof-Lex Finishing and Polishing System.

Indirect Procedure:

• Dental Operatory:

  • Shade Selection: Choose the shade before isolation.
  • Preparation and Impressioning: Prepare tooth and take an impression.

Laboratory Procedure:

• • • Casting and Trimming:
      • Prepare and trim the cast, apply separating medium.
    • Composite Application:
      • Place die back into the articulated arch; add and slightly overfill with incisal composite.
      • Light cure for 10 seconds, then remove die to avoid sticking. Finish curing.
      • Remove excess composite, develop inclines and ridges.
      • Carefully remove the prosthesis from the die; ensure clean separation from the cured restoration.
      • Check restoration on the master die for fit, flash, and undercuts. Adjust and polish as needed.

Dental Operatory Procedure:

• • Roughen the interior surfaces of the indirect restoration.
  • Clean the prosthesis in a soap solution using an ultrasonic bath and rinse thoroughly.
  • Cement the prosthesis using a 3M ESPE resin cement system, following the manufacturer’s instructions

Additional Information

Country of Origin: USA

Manufacturer:
3M ESPE Dental Products
2510 Conway Avenue, St. Paul, MN 55144-1000, USA

Packer:
3M ESPE Dental Products
2510 Conway Avenue, St. Paul, MN 55144-1000, USA

Imported & Marketed By:
3M India Limited
No. 48, South West Corner Portion in B Building B, Near Main Gate, at Toll India Logistics Pvt. Limited Compound, Puzhal, Ambattur Road, Puzhal, Chennai – 600066, Tamil Nadu, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product.