3M ESPE RelyX Veneer Cement Translucent

Description

3M ESPE RelyX Veneer Cement Translucent is a permanent, light-cure-only resin luting material designed for the cementation of porcelain, ceramic, and composite veneers. It must be polymerized by visible light in the 400–500 nm wavelength range, ensuring efficient curing even through thin, translucent veneers. The cement offers excellent color stability and a natural-looking finish, making it ideal for highly esthetic restorations. Its easy handling and cleanup simplify veneer procedures, while try-in pastes provide a close color match to the final cured cement, enhancing patient satisfaction and clinical outcomes.

Indication:

• Cementing porcelain, composite and ceramic veneer restorations

Key Features

• Light-Cure Only System: Requires polymerization by visible light in the 400–500 nm wavelength range, ensuring efficient curing even through thin, translucent veneers.
• Excellent Color Stability: Provides long-lasting esthetic results, crucial for highly visible veneer restorations.
• Customer-Preferred Delivery and Shading System: The syringe offers an easy-to-use delivery system with optimal viscosity for precise insertion and positioning of veneers.
• Water-Soluble, Residue-Free Try-In Pastes: Try-in pastes closely match the final cured cement shade and are easy to rinse away, simplifying shade selection and cleanup.
• Easy to Clean Up: Excess cement can be removed easily after placement, streamlining the clinical workflow.
• Efficient Bonding: Designed for simple and effective bonding of porcelain, ceramic, and composite veneers.
• Easy Dispensing: The syringe format allows for controlled, direct application and seating of the veneer.
• Available in Multiple Shades: Translucent and other shades are available to match various esthetic requirements.

Specifications

COMPOSITION:

• RelyX Veneer cement is a light-cure, methacrylate resin-based luting material

TECHNICAL DATA

• Film Thickness: 5-10 μm
• Flexural Strength: 123 Mpa
• Color Stability: Good
• Shade: Translucent
• Solubility: 0.3 μg/mm3
• Water Sorption: 29 μg/mm3
• Compressive Strength: 345.7 MPa
• Diametral Tensile Strength: 77.6
• Depth of Cure: 3.0 mm

Packaging

• 1 x 3gm Syringe

Directions for Use

To use 3M™ ESPE™ RelyX™ Veneer Cement effectively for the permanent cementation of ceramic or composite veneers, follow these step-by-step directions:

Materials Needed:

• RelyX Veneer Cement syringe (chosen shade)
• Appropriate bonding system (RelyX Ceramic Primer and Single Bond Dental Adhesive System or Scotchbond™ Multi-Purpose Dental Adhesive System)
• Curing light with a minimum output of 400 mW/cm² in the 400-500 nm wavelength range
• Mixing pad
• Applicator tips (if required)
• RelyX Try-In Paste (for shade selection, if needed)

Procedure:

• Preparation: Ensure that the veneer restoration and tooth preparation are complete and clean. Verify that the restoration fits properly and is free from any debris.
• Shade Selection (Optional): If needed, use RelyX Try-In Paste to select the appropriate shade. Apply a small amount of the paste to the veneer and place it on the tooth to verify shade accuracy. Remove any excess paste.
• Adhesive Application: Apply the chosen bonding system (RelyX Ceramic Primer and Single Bond Dental Adhesive System or Scotchbond™ Multi-Purpose Dental Adhesive System) following the manufacturer’s instructions. Allow it to set as directed.
• Cement Mixing: If the cement is not pre-mixed, dispense a small amount of RelyX Veneer Cement onto a mixing pad. Mix the cement thoroughly according to the manufacturer’s recommendations. Ensure that it reaches a uniform consistency.
• Cement Placement: Load the mixed cement into a cement syringe. If the veneer is small, an applicator tip may be used for precise placement. Dispense the cement evenly on the internal surface of the veneer.
• Veneer Seating: Carefully position the veneer onto the prepared tooth. Ensure it is aligned correctly and press it into place. Excess cement may flow out.
• Curing: Use a curing light with a minimum output of 400 mW/cm² in the 400-500 nm wavelength range to cure the cement. Ensure that the light reaches all areas of the veneer for the recommended cure time (typically 30 seconds, but 40 seconds for A5/Dark shade).
• Excess Cement Removal: After curing, remove any excess cement with a suitable instrument. Pay particular attention to interproximal areas and margins to ensure a clean finish.
• Final Check: Verify that the veneer is securely in place and that there is no residual cement. Make any necessary adjustments for proper occlusion and esthetics.
• Post-Operative Care: Instruct the patient on post-operative care, including oral hygiene and any dietary restrictions, if necessary.

Additional Information

Country of Origin: USA

Manufacturer:
3M ESPE Dental Products
2510 Conway Avenue, St. Paul, MN 55144-1000, USA

Packer:
3M ESPE Dental Products
2510 Conway Avenue, St. Paul, MN 55144-1000, USA

Imported & Marketed By:
3M India Limited
No. 48, South West Corner Portion in B Building B, Near Main Gate, at Toll India Logistics Pvt. Limited Compound, Puzhal, Ambattur Road, Puzhal, Chennai – 600066, Tamil Nadu, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product.