Waldent Automatic Crown Remover Instruments Kit (K21/5)

Description

Waldent Automatic Crown Remover Kit is a spring-loaded mechanical device to remove the bonded crowns and bridges by an intensive impulse.Spring loaded crown remover with 6 tips, a wrench and a swivel lock key.Special tip for bridge removing and impulse strength is controllable.Six different designs of tips allow engaging in different places of crown margins.It has a special steel string that can be pulled underneath the bridge and engaged in the rectangular tip when an impulse is applied to it pulls out the bridge.Impulse strength should be lowered for root treated teeth.For permanent removal of crowns by breaking the seal between tooth and crown even after sectioning with a bur.The setting of the impulse to a higher level can break the underlying tooth. Be careful.

INDICATIONS OF AUTOMATIC CROWN REMOVER KIT:

• Permanently cemented crowns and or bridges
• Temporary cemented provisional or final restorations
• Maryland bridges
• Orthodontic brackets/bands
• Removable appliances/retainers fixed abutments

Key Features

Features:

1) Material

– Made of high grade Stainless Steel

2) Durable

– Easy to use

– Fracture resistant

3) Ergonomic Design

– Light Weight – Less Fatique
– Better Grip – Enhanced Working Efficiency

4) Rust Free 

– Corrosion Resistant – Passivated

5) Disinfection 

– Autoclavable at 135 degree celsius

Technical Specifications:

Specifications

STERILIZATION:

• We recommend that the temperature does not exceed 120C
• Dry heat sterilization see that temperature does not exceed 180C and there should be no long exposure as this would cause discoloration, loss of temper and this in turn would disturb the hardening of the instrument
• Do not use substandard chemicals or disinfectants as they can damage the instruments
• Avoid use of unsuitable highly acidic chlorine containing agents
• Use Demineralized water only
• Never rub an instrument with metal brush at the time of cleaning.

Packaging

Automatic Crown Remover Kit:

• NiTi Wire Small
• NiTi Wire Large
• NiTi Wire Holder
• Miller Tip 1
• Miller Tip 2
• Cutting Tip 3
• General Tip 4
• General Tip 5
• Miller Tip 6
• Tip Wrench
• Swivel Lock key

Directions for Use

• Preparation:

  • Ensure that the Waldent Automatic Crown Remover Kit is assembled correctly and all components are in good condition. This includes verifying the functionality of the spring-loaded mechanism, tips, wrench, swivel lock key, and steel string.

• Patient Preparation:

  • Position the patient comfortably in the dental chair, ensuring proper isolation and access to the restoration that needs to be removed. Provide anesthesia or sedation as necessary for patient comfort.

• Selection of Tip:

  • Choose the appropriate tip from the six different designs provided in the kit based on the type and location of the crown or restoration to be removed. Each tip is designed for specific engagement with different crown margins or bridges.

• Engaging the Crown or Bridge:

  • Place the selected tip of the Waldent Automatic Crown Remover underneath the crown or bridge margin. Ensure proper engagement to avoid slipping during the removal process.

• Adjusting Impulse Strength:

  • Adjust the impulse strength using the controllable setting on the device. For root-treated teeth or fragile restorations, lower the impulse strength to prevent damage to the underlying tooth structure.

• Applying Impulse:

  • Apply an impulse by activating the device. The spring-loaded mechanism will deliver a sudden and controlled force to dislodge the crown or bridge by breaking the cement seal. Ensure the impulse is directed perpendicular to the restoration for optimal effectiveness.

• Removing the Restoration:

  • Once the crown or bridge is dislodged, carefully remove it from the tooth or abutment. Use the wrench and swivel lock key as needed to stabilize and maneuver the restoration during removal.

• Post-Procedure Care:

  • Inspect the tooth or abutment and the removed restoration to ensure completeness and integrity of the removal process. Provide appropriate post-operative instructions to the patient, including care for any exposed teeth or abutments.

• Cleaning and Maintenance:

  • Clean the Waldent Automatic Crown Remover Kit thoroughly after each use according to manufacturer’s instructions. Ensure all components are sterilized using recommended methods before storing them in a clean and dry environment.

• Safety Considerations:

  • Always exercise caution when using the Waldent Automatic Crown Remover Kit, especially when setting the impulse strength. Higher impulse settings can potentially damage underlying teeth if not applied correctly. Ensure proper training and experience in using the device to avoid complications.

Additional Information

• Country of Origin: PRC

Warranty & Service

• 6 Months warranty against Rust