Voco Meron Set Powder & Liquid

Description

Indications

Key Features

• Low solubility in the mouth
• Low acidity for patient comfort
• Versatile clinical applications
• Professional dental practitioner use
• Quick work and setting times
• Easy excess material removal
• Reliable adhesion for luting procedures
• Thin film thickness (15µm) ensures high accuracy

Specifications

• Composition: Calcium aluminium fluorosilicate glass – Water – Polyacrylic acid – Tartaric acid – Parabens
• Working Temperature Range: 15°C – 23°C
• Powder to Liquid Ratio: 3.0:1 (g/g)
• Working Time: Approximately 3 minutes at room temperature
• Setting Time: 3 – 5 minutes in the mouth
• Storage Conditions: 4°C – 23°C

Packaging

Meron Set Powder & Liquid:

• 1 x liquid, 15 ml
• 1 x Powder, 35g

Meron, Liquid, 15ml:

• 1 x liquid, 15 ml

Directions for Use

Materials Needed:

• Voco Meron Set & Liquid
• Mixing pad or glass plate
• Clean enamel, dentine, and cavity surfaces
• Hard brush for application
• Abrasion-resistant spatula
• Cold water for instrument rinsing

Usage Steps:

Surface Preparation:

• Clean and dry enamel, dentine, and cavity surfaces thoroughly.
• Clean cores before luting (e.g., with pumice and water), rinse well, and avoid excessive drying.
• Ensure sufficient residual dentine thickness to prevent pulp irritation. Protect the pulp or build up the core if necessary.

Mixing:

• Shake the powder container before use.
• Maintain a working temperature of 15°C – 23°C.
• Use one drop of liquid for one level measuring scoop of powder (powder/liquid ratio = 3.0:1 g/g).
• Place powder and liquid on a suitable glass plate or mixing pad.

Mixing Procedure:

• Hold the liquid dropper bottle vertically.
• Divide the powder into three portions and mix it into the liquid portion by portion using a solid plastic spatula or an abrasion-resistant spatula.

Application:

• Meron has a working time of approximately 3 minutes at room temperature and sets within 3 – 5 minutes in the mouth. Temperatures affect working time.
• Achieve the correct consistency for application to the core and into the crown with a hard brush.
• Prevent contact with water and saliva during application and setting.
• Remove excess material during the rubber-elastic phase (before complete curing) using a scaler or a curette.

Post-Application:

• Ensure all remaining varnish and isolating agents are completely removed before final luting with Meron.
• Rinse instruments with cold water immediately after use.
• For removal of cement residues after orthodontic band removal, use an ultrasonic scaler.

Storage:

• Close powder and liquid containers securely after use.
• Store Meron between 4°C and 23°C.
• Do not use the product past its expiry date.

Disposal:

• Dispose of the product according to local regulations.

Additional Information

• Country Of Origin: Germany
• Manufacturer: Voco

Warranty & Service

• Warranty is not applicable for this product.