Vincismile HugeBond Universal FliPro Light Cure Dental Adhesive

Description

Vincismile HugeBond Universal FliPro is an advanced 8th-generation self-etch dental adhesive designed for exceptional bonding strength and versatility. Featuring a user-friendly flip-open cap, it ensures easy, one-handed operation. This adhesive is compatible with total-etch, self-etch, and selective-etch techniques, making it ideal for both direct and indirect restorations. With a low film thickness of just 3μm and ultra-mild pH (2.7), it provides strong adhesion to various substrates, including enamel, dentin, metal, ceramic, zirconia, and composite materials. The formulation includes MDP monomer to enhance bonding strength and effectively seal dentin tubules, ensuring long-lasting results and reduced post-operative sensitivity.

Advantages:

• Impressive Universality: Suitable for various surfaces including enamel, dentin, composite resin, metal, and oxide full-ceramic (zirconia, alumina).
• Cement Compatibility: Works with light-cured, self-cured, and dual-cured cements.
• Multiple Etch Techniques: Compatible with self-etch, total-etch, and selective-etch techniques.
• Bonding Strength: Provides a bonding strength of over 20 MPa to tooth surfaces.
• Strong Permeability: Easily penetrates dentin tubules to form a strong bond upon curing.
• Low Film Thickness: No thicker than 3μm, ensuring minimal interference with restorations.
• Reduced Microleakage: Prevents secondary caries and minimizes post-operative sensitivity.
• User-Friendly Design: Flip-open cap for easier one-handed application and an innovative dispensing system that reduces waste.
• Larger Capacity: Reduces inventory pressure and cost by offering a larger bottle size.

Indications:

• Direct bonding of restorations made of metal, ceramic, zirconia, composite, and other materials.
• Cementation of orthodontic bands.
• Direct bonding under light-cured composite resin or compomer fillings.
• Repair of dental restorations made from ceramic, composites, or metal alloys, using light-cured composite resin.
• Use with resin cement for various bonding applications.

Key Features

Universal Compatibility:

• Works on various substrates like metal, ceramic, zirconia, and composite.
• Supports total-etch, self-etch, and selective-etch techniques.
• Compatible with light-cured, self-cured, and dual-cured cements.

Strong and Reliable Bonding:

• Provides excellent adhesion with a bonding strength of 20 MPa or higher.
• Features a low film thickness of just 3μm.
• Deep penetration into dentin tubules for effective bonding.

Gentle and Safe:

• Minimal postoperative sensitivity for a more comfortable patient experience.
• Low microleakage, reducing the risk of secondary caries.

Specifications

• Generation: 8th Generation
• Shelf Life: 2 Years
• Bonding Strength (Self-etched Dentin): 30.4 MPa
• Bonding Strength (Self-etched Enamel): 25.4 MPa
• Bonding Strength (Etched Enamel): 30.3 MPa
• Application Type: Suitable for both direct and indirect restorations
• Adhesive Strength: ≥ 20 MPa
• Film Thickness: 3μm
• pH Level: Ultra-mild pH of 2.7
• Active Ingredient: MDP Monomer
• Dentin Tubule Sealing Efficiency: Over 90%

Packaging

• 1 x 6ml Bottle

Directions for Use

Surface Preparation:

• Clean and dry the tooth surface before application.
• If using total-etch or selective-etch techniques, apply phosphoric acid etchant as required, then rinse and dry.

Adhesive Application:

• Shake the bottle well before use.
• Dispense a small amount of adhesive onto a clean mixing pad.
• Use a micro-brush or applicator to apply a uniform layer of adhesive onto the prepared surface.

Air Drying:

• Gently air-dry the adhesive for at least 5 seconds to evaporate solvents.
• Ensure the adhesive remains glossy; if not, apply an additional layer and repeat air drying.

Light Curing:

• Cure the adhesive using a dental curing light for 10 seconds at a minimum light intensity of 500 mW/cm².

Restoration Placement:

• Proceed with composite placement, cementation, or restoration as per standard clinical procedures.

Final Check:

• Ensure proper adhesion and restoration integrity before final polishing.

Additional Information

Country of Origin: China

Manufacturer:
Shandong Huge Dental Material Corporation
No. 68 Shanghai Road, Donggang District, Rizhao City, Shandong Province – 276800, P.R. China

Packer:
Shandong Huge Dental Material Corporation
No. 68 Shanghai Road, Donggang District, Rizhao City, Shandong Province – 276800, P.R. China

Distributed By:
VinciSmile Group LLC
20524 Carrey Rd., Walnut, CA 91789, USA

Warranty & Service

• Warranty is not applicable for this product