SuperEndo Inlay Preparation Diamond Burs Kit

Description

SuperEndo Inlay Preparation burs are designed to offer speedy, simple, and accurate tooth preparation for a wide range of crown and bridge restorations, veneers, and Onlays. Precise depth orientation grooves can be achieved easily with the specially designed depth cutting diamond points.

Advantage:

• Long service life and high cutting capacity when preparing and separating porcelain, facing composites and model materials.
• Precise dimension and stable control of quality.
• Enjoy low price but high quality.

Key Features

• Durable Burs with multi-layer coating.
• Full set autoclavable.
• Evenly distributed diamond particles
• Sturdy built

Specifications

• Shank type – Friction grip
• Construction – Stainless steel Shank Coated with diamond particles
• Autoclavable upto 134°C 
• Compatibility: Airotors

Color band on shank:

• Regular – Blue
• Fine – Red
• Superfine – Yellow

Set Of 10 Piece 

• SI-48
• DI-42
• FO-22EF
• EX-21EF
• SF-21
• TF21F
• TF-31
• TF-22
• SF-21F
• EX-18F

Packaging

• 1 X 10 Burs in SuperEndo Inlay Preparation Burs Kit

Directions for Use

• Insert the instrument as deeply as possible into the chuck (Friction Grip).
• Set the handpiece at the required working speed before applying the instrument to the treated area.
• Apply a maximum operating force of 0.4 [N] and do not exceed a speed of 230’000 [rpm].
• Activate water spray during the entire treatment (minimum 50 mL/min).
• Regulate water flow in case of water excess or shortage.
• It is recommended to use a dental dam.
• Use the instruments over the entire length of their working part and not just at the tip, so as to avoid an unconscious increase of the contact pressure causing local overheating.
• Once the preparation has been completed, remove the instrument from the site and allow it to come to a standstill.
• It is recommended to wear gloves and safety glasses. 
• After use, remove the bur to clean and sterilize according to protocol
• Do not use the bur if its bent or if the surface diamond coating has worn- off

Additional Information

Country of Origin: India

Manufacturer:
Vasa Denticity Limited
Plot No. 252/90, Khasra No. 252/90, Lal Dora, Village Bamnoli, Kapashera, Delhi – 110075, India
Phone: +91 72899 99456

Packer:
Vasa Denticity Limited
Plot No. 252/90, Khasra No. 252/90, Lal Dora, Village Bamnoli, Kapashera, Delhi – 110075, India
Phone: +91 72899 99456

Warranty & Service

• Manufacturer/Importer has No Warranty as applicable for this product.
• Dentalkart and the Buyer acknowledge that the Products purchased/used are a subject matter of original Manufacturer/Importer’s warranties only
• Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Dentalkart may assist the customer in registering a request to get the Product replaced or serviced. 
• The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or has not tampered as the case may be.