NSK EndoMate TC2 Endomotor with MP-F16R Head (Y1001027)

Description

Key Features

• Cordless & portable unit for easy operation.
• Slim Head and neck assure higher visibility.
• Large LCD panel and access-friendly key.
• Lightweight, ergonomic design.
• Smart Auto Reverse & Alarm Function.
• 5 programs for different file systems.
• Last program settings can be memorized.
• 90 min. quick charge with a non-contact type charger.
• Light weight to prevent hand fatigue.
• Auto-reverse function for preservation of canal & anatomy.
• 5 programs for different file systems.

Specifications

• Power Supply : AC 230 V 50/60 Hz

• Number of Programs : 5

• Maximum Torque : 3 Ncm (when using 16:1 head)

• Charge/Continuous use: 90 min / 1.2 h (depending on workload)

• Speed range : 100-2,250 min-1 (With 20:1, 16:1, 10:1, 4:1 geared heads)

Packaging

Nsk Endo-Mate TC2 With MP-F16R Head :

• Motor Handpiece ( ENDO-MATE TC2 )
• MP-F16R Head
• Battery Charger
• Power Cord

Directions for Use

• Power on the endomotor using the designated power button.
• Select the appropriate program for your specific endodontic rotary file system. The device offers five pre-set programs to accommodate different file systems.
• Attach the compatible rotary file to the handpiece securely. Ensure it is properly aligned and locked in place.
• Adjust the desired settings using the 5-key operation system and the large LCD display. This may include adjusting the speed, torque, and other parameters based on the requirements of the procedure.
• Before starting the root canal shaping, ensure that the file is properly positioned within the canal and that the handpiece is held in a comfortable grip.
• Begin the procedure by gently activating the motor. Gradually increase the speed and torque as needed, while closely monitoring the progress on the LCD display.
• Pay attention to the Auto Reverse and Alarm Functions. If the audible alarm sounds, it indicates that the file is nearing the preset torque level. Promptly unload the file before the Auto Reverse function is activated to prevent any complications.
• Throughout the procedure, maintain control over the handpiece and monitor the LCD display for any changes or notifications.
• After completing the root canal shaping, power off the endomotor and carefully detach the rotary file from the handpiece.

Additional Information

Country of Origin: Japan

Manufacturer:
Nakanishi Inc.
700 Shimohinata, Kanuma-shi, Tochigi 322-8666, Japan

Packer:
Nakanishi Inc.
700 Shimohinata, Kanuma-shi, Tochigi 322-8666, Japan

Imported By:
Vasa Denticity Ltd.
Khasra No. 15/1, Mustil No. 6, Village Dabodha, Farrukhnagar, Gurugram, Haryana – 122506, India
Phone: +91 72899 99456

Warranty & Service

• Manufacturer/Importer warranty of 1 year as applicable for this product
• Service and Warranty are handled by the manufacturer/importer directly for this product
  
• Dentalkart will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
• Dentalkart and the Buyer acknowledge that the Products purchased/used are a subject matter of original Manufacturer/Importer’s warranties only
• Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Dentalkart may assist the customer in registering a request to get the Product replaced or serviced. 
• The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.