NeoEndo Neopure C-silicone Impression Material Kit

Description

Neopure C-Silicone is a range of Rubber Based Condensation Impression Material. High viscosity condensation polysiloxane (base) is recommended for the two-phase technique (double step impression) in combination with Neopure C-Silicone Light Body.

Indications

• Fixed and removable prostheses
• Crowns, bridges, onlays, and inlays
• Complete dentures

Key Features

• Good flowability and rigidity
• Good visibility- the color contrast of the putty & light body ensures better impression interpretation
• High impression accuracy and precision
• High tear strength- minimizes the risk of the impression tearing while removing from the patient’s mouth
• Balance between the working and setting time
• Biocompatible- allows to use safely on patients with damaged mucosa
• High dimensional stability even after disinfection
• Good final hardness- ensures accurate model
• Pleasant taste – Mint flavor & odor

Specifications

Packaging

 NeoEndo Neopure C-silicone Material Kit

• 1 x 1500gm Putty
• 1 x 140gm Light Body
• 1 x 70gm Catalyst

NeoEndo Neopure C-silicone Putty

• 1 x 1500gm Putty

NeoEndo Neopure C-silicone Catalyst Gel

• 1 X 70gm Catalyst Gel

NeoEndo Neopure C-silicone Light Body

• 1 x 140gm Light Body

Directions for Use

• Preparation: Before use, ensure that the NeoEndo Neopure C-Silicone Impression Material Kit components (base and catalyst) are at room temperature. Prepare your workspace and have all necessary items (mixing tools, impression tray, etc.) ready.

• Mixing the Material:

  • Squeeze equal amounts of the base and catalyst pastes onto a clean pad.
  • Mix the materials thoroughly using a spatula until the mixture is homogeneous and free of streaks. Ensure the consistency is smooth and uniform.

• Loading the Tray:

  • Once the material is well-mixed, load the impression tray with the mixed impression material. The material should be evenly spread to avoid air bubbles.

• Taking the Impression:

  • Position the loaded impression tray in the patient’s mouth, ensuring it covers the entire area of interest (e.g., root canal or endodontic space).
  • Gently seat the tray and hold it in place, allowing the material to set. Follow the recommended working and setting times, typically 3-4 minutes, depending on the specific product instructions.

• Removal of Impression:

  • Once the material has set, gently remove the tray from the patient’s mouth. Ensure that the impression is free from any distortions or tears.

• Aftercare:

  • Immediately clean any remaining impression material from the tray and surrounding areas.
  • If needed, disinfect the impression for transport or storage, following the manufacturer’s guidelines.

• Storage and Disposal:

  • Store any leftover material in a cool, dry place, and discard any unused mixed material as per the manufacturer’s disposal instructions.

Additional Information

Country of Origin: India

Manufacturer:
Orikam Healthcare India Pvt. Ltd.
9753, 3rd Floor, Arogyam Building, Railway Road, Subhash Nagar, Gurgaon – 122001, Haryana, India
Phone: +91 72899 99456

Packer:
Orikam Healthcare India Pvt. Ltd.
9753, 3rd Floor, Arogyam Building, Railway Road, Subhash Nagar, Gurgaon – 122001, Haryana, India
Phone: +91 72899 99456

Marketed By:
Orikam Healthcare India Pvt. Ltd.
9753, 3rd Floor, Arogyam Building, Railway Road, Subhash Nagar, Gurgaon – 122001, Haryana, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product.