Maarc Heat Cure Liquid – 225ml (6101/225)

Description

Heat Cure acrylic denture base material. Simple mixing, easy to process. Cross linking ensures superior quality.

Key Features

• Heat Cure acrylic denture base material.
• Simple mixing, easy to process.
• Cross linking ensures superior quality.
• Superior quality

Specifications

COMPOSITION :

Liquid :

• Methyl methacrylate monomer
• Inhibitor – hydroquinone
• Cross-linking agent – ethylene glycol dimethacrylate

Shelf life and storage :

• Best before 36 months under proper storage.
• Store at a temperature between 10°C to 30°C.
• Keep the powder and liquid containers tightly closed to avoid contamination.

Packaging

• 1 x MAARC Heat Cure Monomer – 250ml

Directions for Use

Dewaxing Residual Wax:

• Thoroughly flush out any residual wax after dewaxing using boiling water.

Apply Separating Medium:

• Apply a separating medium to the gypsum surface, excluding the mold space. Allow it to dry thoroughly.

Mixing the Resin:

• Dispense 5 mL of liquid into a mixing cup.
• Add 10 cc of powder to the liquid by tapping the dispensing jar.
• Do not mix the powder and liquid using a spatula to avoid air entrapment.
• The mixture will attain a moldable, dough-like consistency within 20-30 seconds from the start of mixing.

Packing the Resin:

• Remove the dough in one piece from the mixing jar without producing air bubbles.
• Pack the dough into the model invested in the flask.
• The resin can be manipulated and placed into the desired area within 8 minutes from the start of mixing.

Bench Curing:

• After packing the resin into the mold space, leave it to bench cure for 30 minutes under a pressure of 30-85 pounds per square inch.

Polymerization (Heat Activation):

• Option A: Process the resin in a 74°C water bath for 8 hours, then increase the temperature to 100°C for 1 hour.
• Option B: Process the resin in a 74°C water bath for 2 hours, then increase the temperature to 100°C for 1 hour.

Post-Processing:

• After deflasking, place the processed denture into a plaster dissolvent to clean it.

Finishing and Polishing: 

• Once cured, the acrylic can be trimmed, shaped, and polished as needed to achieve the desired fit and appearance.

Storage: 

• Store the Maarc Heat Cure Powder in a cool, dry place, away from direct sunlight. The powder has a shelf life of 36 months under proper storage conditions.

Additional Information

Country of Origin: India

Manufacturer:
AADI MED PVT. LTD.
214 BLUEBELL INDUSTRIAL ESTATE CHINCHPADAWALIV,VASAI EAST,VASAI-VIRAR, VASAI EAST, WALIV, VASAI
Phone: +91 72899 99456

Packer:
AADI MED PVT. LTD.
214 BLUEBELL INDUSTRIAL ESTATE CHINCHPADAWALIV,VASAI EAST,VASAI-VIRAR, VASAI EAST, WALIV, VASAI
Phone: +91 72899 99456

Marketed By:
AADI MED PVT. LTD.
214 BLUEBELL INDUSTRIAL ESTATE CHINCHPADAWALIV,VASAI EAST,VASAI-VIRAR, VASAI EAST, WALIV, VASAI
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product.