Labodent Zirconia Ceramic Blanks ST-C | A2 Shade | Pre-Shaded CAD/CAM Discs

Description

Labodent Zirconia Ceramic Blanks ST-C | A2 Shade | Pre-Shaded CAD/CAM Discs are pre-shaded standard translucency milling discs designed for digital fabrication of dental restorations requiring an A2 Vita shade match — one of the most commonly prescribed shades in everyday restorative and prosthetic dentistry. The ST-C geometry ensures compatibility with open-architecture CAD/CAM milling systems used in dental laboratories and in-office digital workflows.

The A2 pre-pigmentation is distributed uniformly throughout the blank during manufacturing, so shade consistency is maintained across the full depth of the restoration after sintering — reducing reliance on surface staining and keeping the finishing process efficient. The sintered material delivers high flexural strength suitable for posterior load-bearing restorations alongside the translucency required for aesthetically demanding anterior cases.

This blank pairs directly with the Labodent A1 Shade variant for laboratories handling cases across the A shade range, allowing a single milling system to manage the two most frequently prescribed tooth shades in the Indian dental market without sourcing from multiple suppliers.

Key Features

• Pre shaded ST color technology for uniform results
• High translucency for enhanced esthetic outcomes
• Excellent resistance to aging and discoloration
• Supports multi unit bridge fabrication
• High fracture resistance under functional load
• Consistent milling performance in CAD CAM systems
• Biocompatible material suitable for oral use
• Optimized for both strength and visual appearance

Specifications

• Product Type: Zirconia Blank
• Shade: A2
• Size: 98mm
• Material: Zirconia (ZrO2)
• Density: ≥6.09 g/cm³
• Strength: 1100Mpa

Physical Characteristics:

• Density After sintering: ≥6 . o9glcm3
• Fracture Toughness: ≥5 . OMpa. m1 2
• Hardness: (Hv10)1250
• Sintering Temperature: 1530 ℃

Chemical Components:

• zro2+Hfo2+Y203:  ≥99%
• Y203:  4.5% – 6.0%
• AI203: < 0.1 5%
• Other oxide: < 0 . 5%

Packaging

• 1 x Zirconia Blanks

Directions for Use

Preparation

• Select appropriate zirconia blank size and shade
• Load the blank into CAD CAM milling machine

Milling

• Design restoration using CAD software
• Mill the restoration from the zirconia blank

Sintering

• Place milled restoration in sintering furnace
• Sinter at recommended temperature of 1530°C

Finishing

• Adjust occlusion and contour if required
• Polish or glaze for final aesthetics

Additional Information

Country of Origin: India

Manufacturer:
Vasa Denticity Limited
Dock No. IN7 & IN8, Shed 1, Pataudi Road, Near Adani Logistics Park, ICD Patli, Killa No. 14/2, Gurugram – 122503, Haryana, India
Phone: +91 72899 99456

Packer:
Vasa Denticity Limited
Dock No. IN7 & IN8, Shed 1, Pataudi Road, Near Adani Logistics Park, ICD Patli, Killa No. 14/2, Gurugram – 122503, Haryana, India
Phone: +91 72899 99456

Marketed By:
Vasa Denticity Limited
Dock No. IN7 & IN8, Shed 1, Pataudi Road, Near Adani Logistics Park, ICD Patli, Killa No. 14/2, Gurugram – 122503, Haryana, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product.