Labodent Cobalt Chromium Alloy Powder (15-53μm) – 5Kg

Description

The Cobalt Chromium Alloy Powder (15-53μm) – 5Kg is a high-performance material designed for dental prosthetics. With precise granularity control, it ensures consistent results, providing enhanced durability and strength for frame structures. This alloy offers superior crack- and crumble-resistance, ensuring long-lasting stability. It also features a high utility ratio, making it an efficient choice for dental professionals. The material benefits from advanced heat treatment technology, which optimizes toughness and performance. Additionally, it allows low-temperature annealing, facilitating smooth and aesthetically pleasing finishes. The powder is easy to handle and supports efficient production with a streamlined workflow.

Key Features

• Provides durability and strength for frame structures and prosthetics
• Ensures consistent and uniform results in production
• Guarantees long-lasting stability and reliability
• Maximizes material efficiency for cost-effective use
• Optimizes material toughness and performance
• Enables annealing at lower temperatures for flexible processing
• Readily producible with a streamlined, concise workflow
• Smooth, visually appealing finish for dental prosthetics
• Simplifies the removal of support structures after production

Specifications

• Particle Size: 15-53µm for precise granularity and uniformity
• Hall Flow (s/50g): <18 for improved powder flow and handling efficiency

• Crack and Crumble Resistance: Ensures long-term stability and durability of prosthetic frames
• High Toughness: Ideal for durable frame clasps and structures
• Low Temperature Annealing: Enables heat treatment at lower temperature

Chemical Composition:

• Cobalt (Co): 61.50%
• Chromium (Cr): 27.75%
• Tungsten (W): 8.50%
• Silicon (Si): 1.50%
• Iron (Fe): 0.50%
• Manganese (Mn): 0.25%

Packaging

• 1 x 5kg Bottle

Directions for Use

• Preparation: Ensure the working area and equipment are clean and dry before handling the alloy powder.
• Mixing: Blend the Labodent Cobalt Chromium Alloy Powder with the required binder or other materials based on the prosthetic requirements.
• Sintering: Follow the specified heat treatment protocol for sintering the alloy at the recommended temperature to achieve optimal strength and durability.
• Frame Formation: Using the alloy, create the prosthetic frame or clasp according to the specific dental design. Ensure proper molding techniques are used for precise shape.
• Finishing: After sintering, finish the prosthetic frame with standard polishing and annealing procedures to achieve a smooth, aesthetically pleasing surface.
• Support Removal: If applicable, carefully remove any support structures that were used during the production process.
• Inspection: Perform a final inspection to ensure the frame meets the required standards for fit, durability, and aesthetics.

Additional Information

Country of Origin: India

Manufacturer:
Vasa Denticity Limited
Dock No. IN7 & IN8, Shed 1, Pataudi Road, Near Adani Logistics Park, ICD Patli, Killa No. 14/2, Gurugram – 122503, Haryana, India
Phone: +91 72899 99456

Packer:
Vasa Denticity Limited
Dock No. IN7 & IN8, Shed 1, Pataudi Road, Near Adani Logistics Park, ICD Patli, Killa No. 14/2, Gurugram – 122503, Haryana, India
Phone: +91 72899 99456

Marketed By:
Vasa Denticity Limited
Dock No. IN7 & IN8, Shed 1, Pataudi Road, Near Adani Logistics Park, ICD Patli, Killa No. 14/2, Gurugram – 122503, Haryana, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicale for this product.