Garrison Dental Composi-Tight 3D Sectional Matrix System Kit

Description

Composi-Tight 3D Fusion sectional matrix system has been engineered to provide the ultimate solution to even the most difficult of Class II challenges. Whether you’re restoring an entire quadrant, the distal of the canine, or a completely broken down MOL, Composi-Tight 3D Fusion provides you with the materials to achieve predictable results.

Tight contacts – guaranteed – Superior tooth separation force through advanced engineering and material selection guarantees perfect contacts restoration after restoration.

Ideal anatomy – Soft-Face silicone ring tips with enhanced marginal ridge anatomy hug the pre-contoured dead-soft matrices to the tooth for flash free, perfectly contoured restorations.

Simplified technique – Composi-Tight 3D Fusion is packed with features like Tru-Stack technology for easy ring stacking, over-the-wedge placement and Ultra-Grip anti-ring slip extensions that make system use intuitive and frustration free.

Short Ring (blue) and Tall Ring (orange) :

• Both Short ring (blue) and Tall ring (orange) have Ultra-Grip™ retention extensions to prevent spring-off
• Improved stacking for MODs
• 20%+ Improved separating force
• Enhanced marginal ridge built into Soft-Face™ silicone tips for better adaptation
• Flash is virtually eliminated by the three dimensionally contoured ring tips.
• The new “horseshoe” shape is significantly easier to open yet produces more tooth separating power.

Wide Preparation Ring :

• Dentistry’s first Wide Preparation ring! Greatly simplifies these tougher cases — even with a missing cusp!
• The same great retention and adaptation as the Short ring (blue) and Tall ring (orange) above

Curve Matrix Bands :

• Recreates ideal anatomy with the design of the new Full Curve Matrix Bands
• Easier placement with new Grab-Tabs™ on the occlusal edge
• Longer bands are a perfect match for the Wide Prep ring

Wedges :

• Soft-Face™ exterior adapts to interproximal irregularities
• Flexible fins glide in but prevent wedge back-out
• Superior gingival seal

Ring Placement Forceps :

• Dentistry’s premier ring placement forceps durability prevents leverage-robbing flexion
• Easily opens strong rings regardless of hand strength or size
• Fits virtually any ring from any manufacturer

Key Features

• Operator-friendly retaining system
• Naturally contoured bands
• Anatomically correct contacts
• Contacts at the height of contour
• Rings produce optimal tooth separation for excellent tight contacts

Specifications

• Dead-soft three dimensionally contoured matrices have placement tabs for easier occlusal placement and Garrison’s revolutionary non-stick coating for hassle-free removal.
• Composi-Tight 3D Fusion Ultra-Adaptive wedges glide in, but won’t back out. Their soft, flexible exterior readily adapts to interproximal irregularities for a superior gingival seal.
• All three of the Composi-Tight 3D Fusion separator rings will fit over the wedge for easier placement. With Ultra-Grip retention extensions, they will stay firmly in place from the distal of the canine to the widest of molar preparations.

Packaging

• 1 x Composi-Tight® 3D Fusion™ Short Ring (FX400)
• 1 x Composi-Tight® 3D Fusion™ Tall Ring (FX500))
• 1 x Composi-Tight® 3D Fusion™ Wide Prep Ring (FX600)
• 40 x Assorted Composi -Tight® 3D Fusion™ Full Curve Matrices
• 40 x Assorted Composi -Tight® 3D Fusion™ Wedges
• 1 x Composi-Tight® 3D Fusion™ Ring Placement Forceps

Directions for Use

Technique for Class II restorations utilizing Composi-Tight 3D Fusion Soft Face Rings

1. Place rubber dam. Isolation of the area helps to prevent contamination from blood and saliva. As with many dental procedures, aspiration of small parts is a valid concern.

2. Place FenderWedge prior to preparation to pre-separate and protect the adjacent tooth. Prepare tooth with conservative Class II preparation. Once the preparation is complete, remove the FenderWedge and place your matrix.

   

3. Place Composi-Tight 3D Fusion sectional matrix band. Select a matrix band that most closely approximates the occlusogingival height of the tooth. The Grab-Tab should be oriented toward the occlusal margin and may be bent over the adjacent tooth after placement

   

4. Insert Composi-Tight 3D Fusion wedge. Keep a finger on the matrix band to prevent the wedge from dislodging the band during insertion. Wedge firmly, a high viscosity resin packed into the preparation may displace the band away from the tooth.

   

5. Apply the Composi-Tight 3D Fusion Soft Face ring retainer. Select a retainer ring that is appropriate for the embrasure and tooth being restored. Spread it with the *Composi-Tight 3D Fusion Ring Placement forceps and place it over the wedge.

   

6. Very Important: push the matrix band firmly into contact with the adjacent tooth in the desired contact area.

7. Use your preferred etching, disinfecting and bonding technique following manufacturer’s instructions. Apply your preferred composite resin following manufacturer’s instructions.

8. Remove the ring, wedge and band.

9. Contour and polish the restoration.

Additional Information

• Country Of Origin: USA
• Manufacturer:150 DeWitt lane Spring lake,MI,USA 49456.

Warranty & Service

• Warranty is not applicable for this product.