Dentaltech Lindemann Drill 2.0mm DLC Coated

Description

Dentaltech Lindemann Drill 2.0mm DLC Coated is a precision surgical drill designed for efficient bone cutting, osteotomy preparation, and implant-related surgical procedures. The Lindemann flute design enables rapid and controlled bone removal while maintaining excellent cutting efficiency and surgical precision. Manufactured with a Diamond Like Carbon (DLC) coating, the drill offers enhanced surface hardness, wear resistance, and reduced friction during operation. The 2.0 mm diameter makes it suitable for osteotomy enlargement, cortical bone modification, and various oral surgical applications requiring controlled bone reduction. Its precision-engineered cutting geometry promotes smooth drilling performance while helping maintain procedural accuracy. The DLC-coated surface contributes to extended instrument longevity and consistent cutting performance over repeated use. Dentaltech Lindemann Drill 2.0mm DLC Coated is an essential surgical instrument for implantologists and oral surgeons seeking reliability, efficiency, and precision in bone preparation procedures.

Key Features

• Side-cutting Lindemann design for precise osteotomy initiation without slipping on angled bone
• DLC (Diamond-Like Carbon) coating dramatically increases surface hardness and cutting efficiency
• Reduced friction cutting minimizes heat generation and preserves surrounding bone vitality
• Extended drill lifespan through DLC wear resistance and metallic adhesion prevention
• 2.0 mm working diameter matches standard pilot drilling protocols across implant systems
• Latch-type shank compatible with standard surgical motor contra-angle handpieces
• Combines pilot tip accuracy with lateral cutting for versatile clinical use
• Autoclavable for sterile repeatable use across implant placement procedures

Specifications

• Product Type: Surgical Osteotomy Drill (Lindemann Side-Cutting Design)
• Brand: Dentaltech
• Working Diameter: 2.0 mm
• Working Length: 2cm
• Design: Lindemann (pilot tip with lateral side-cutting flutes)
• Coating: DLC (Diamond-Like Carbon)
• Material: Surgical-grade stainless steel with DLC coating
• Shank Type: Latch-type (standard surgical motor CA compatible)
• Application: Osteotomy initiation, angulation correction, lateral bone widening
• Sterilization: Autoclavable
• Reusability: Reusable with proper cleaning, sterilization, and inspection

Packaging

• 1 x Dentaltech Lindemann Drill 2.0mm DLC Coated

Directions for Use

Pre-Surgical Preparation

• Sterilize the drill via autoclave before clinical use
• Verify the drill cutting edges and DLC coating are intact and undamaged
• Prepare the implant site with appropriate flap elevation and hemostasis

Drill Setup

• Connect the drill to a compatible surgical motor contra-angle handpiece
• Set the motor to the recommended speed for pilot drilling (typically 800-1500 RPM)
• Prepare copious saline irrigation for the drilling procedure

Osteotomy Initiation

• Position the drill tip at the planned implant osteotomy site
• Begin drilling with light pressure — the pilot tip provides accurate starting position
• Maintain the drill perpendicular to the bone or at the planned implant angulation
• Use continuous copious saline irrigation throughout the drilling
• Progress the drill to the planned depth in controlled increments

Lateral Widening or Angulation Correction

• If needed, angle the drill laterally to correct osteotomy angulation or widen the initial preparation
• The side-cutting flutes allow controlled lateral bone removal without slipping
• Move the drill in gentle sweeping motions to achieve the desired osteotomy shape
• Verify the corrected angulation with a direction indicator or paralleling pin

Progression to Next Drilling Stage

• Complete the 2.0 mm pilot osteotomy at the planned depth
• Proceed with successive implant system drills per the manufacturer’s drilling protocol
• Verify osteotomy dimensions before implant placement

Post Use Care

• Rinse the drill immediately after use to remove bone debris and blood
• Clean with a soft brush and surgical-grade detergent — do not use metal brushes or abrasive scrubbers on the DLC coating
• Rinse thoroughly with distilled water and inspect the drill for damage
• Sterilize via autoclave following the standard surgical instrument protocol
• Store the sterilized drill in a clean dry environment ready for the next case

Additional Information

Country of Origin: India

Manufacturer:
Kamal Encon Industries Limited
Plot No. 917, IMT Faridabad, Sector 68, Faridabad , 121001, India
Phone: +91 72899 99456

Packer:
Kamal Encon Industries Limited
Plot No. 917, IMT Faridabad, Sector 68, Faridabad,121001, India
Phone: +91 72899 99456

Marketed By:
Vasa Denticity Ltd.
Khasra No. 15/1, Mustil No. 6, Village Dabodha, Farrukhnagar, Gurugram, Haryana , 122506, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not aplicable for this product