Dentaltech Implant Lab Analog Regular – Osstem | Dentium | DIO | Cowellmedi | Neobiotech | Dentis Implant Compatible (GSTLA 400) (Pack of 10)

Description

The Dentaltech Implant Lab Analog Regular (GSTLA 400) is a precision-machined laboratory replica that recreates the exact position and orientation of the implant on the master cast during prosthetic fabrication. Engineered for cross-compatibility with Osstem, Dentium, DIO, Cowellmedi, Neobiotech, and Dentis regular-platform implants, this universal analog significantly simplifies inventory for laboratories handling cases from multiple implant brands. After the clinical impression is taken, the analog is screwed onto the impression coping and embedded in dental stone, providing the technician with an accurate, stable reference for designing abutments, crowns, and screw-retained prostheses that fit precisely when delivered to the patient. Manufactured from grade 5 medical titanium alloy with tight dimensional tolerances and retention grooves for secure stone anchorage, the analog ensures reliable transfer accuracy. Supplied in a convenient pack of 10 for high-volume laboratory workflows across regular-platform implant cases.

Key Features

• Lab analog embedded in dental stone to replicate the regular-platform implant position on the master cast
• Cross-compatible with Osstem, Dentium, DIO, Cowellmedi, Neobiotech, and Dentis regular implant systems
• Single universal-fit solution reduces multi-brand analog inventory burden in the laboratory
• Precision-machined from grade 5 titanium alloy (Ti-6Al-4V) for strength and dimensional stability
• Tight tolerances ensure accurate prosthetic component design and predictable clinical fit
• Retention grooves provide secure stable anchorage when embedded in stone or model material
• Compatible with standard dental stone, die stone, and model resin used in dental laboratories
• Supplied in a convenient pack of 10 for routine high-volume laboratory use

Specifications

• Product Type: Implant Lab Analog
• Brand: Dentaltech
• Model: GSTLA 400
• Platform: Regular
• Diameter: 4.0 mm
• Length: 15 mm
• Compatibility: Osstem, Dentium, DIO, Cowellmedi, Neobiotech, Dentis
• Material: Grade 5 titanium alloy
• Use: Embedded in dental stone model for prosthetic fabrication
• Use Environment: Dental laboratory
• Pack Size: 10 analogs

Packaging

• Pack of 10

Directions for Use

Preparation

• Confirm the case is restored on a compatible regular-platform implant from the supported brands
• Inspect each lab analog for visible damage or machining defects before use
• Verify the impression coping is securely engaged in the patient’s impression

Analog Attachment

• Receive the completed implant-level impression from the clinic
• Engage the lab analog onto the impression coping in its corresponding position
• Hand-tighten the analog screw to secure it firmly to the impression coping
• Verify the analog is fully seated and stable before pouring the model

Model Pouring

• Pour the impression with the chosen dental stone or model material as per the laboratory protocol
• Use vibration while pouring to eliminate air bubbles around the analog
• Allow the stone to set fully before separating the impression from the cast
• Carefully remove the impression while keeping the analog embedded in the stone
• Verify the analog is firmly anchored in the cast with no rotational play

Prosthetic Fabrication

• Use the master cast with embedded analog for abutment selection and prosthetic design
• Fabricate the planned crown, bridge, or screw-retained prosthesis on the cast
• Try-in the finished prosthesis on the cast before delivering to the clinic

Storage

• Store unused analogs in their original packaging in a clean dry environment
• Keep the master cast with embedded analog protected for any future remake or adjustment work

Additional Information

Country of Origin: India

Manufacturer:
Kamal Encon Industries Limited
Plot No. 917, IMT Faridabad, Sector 68, Faridabad , 121001, India
Phone: +91 72899 99456

Packer:
Kamal Encon Industries Limited
Plot No. 917, IMT Faridabad, Sector 68, Faridabad,121001, India
Phone: +91 72899 99456

Marketed By:
Vasa Denticity Ltd.
Khasra No. 15/1, Mustil No. 6, Village Dabodha, Farrukhnagar, Gurugram, Haryana , 122506, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product.