Dentaltech Adin/Noris/AB Dental/MIS Compatible Non-Hex CCM Castable Abutment

Description

Dentaltech Adin Noris AB Dental and MIS Compatible Non Hex CCM is a castable cylinder with a pre machined non hex metal base designed for fabricating custom cast abutments in implant supported prosthetic workflows. The non hex design provides rotational freedom between the abutment and the implant, making it the preferred choice for bridges, full arch restorations, and cases requiring passive fit across multiple implants. The metal base ensures a precise and stable connection at the implant platform while the burnout plastic upper portion allows the technician to wax up and cast a fully customized abutment shape. Manufactured with a medical grade titanium alloy base and high quality castable plastic sleeve, it offers accurate implant fit, reliable fracture resistance, and long term stability under occlusal load. It is compatible with Adin Noris AB Dental and MIS implant systems sharing a common internal connection geometry.

Key Features

• Castable plastic sleeve with pre machined non hex metal base for custom abutment fabrication
• Non hex design allows rotational freedom for passive fit in implant restorations
• Metal base manufactured from medical grade titanium alloy for precise implant connection
• Burnout plastic upper portion allows full wax up and casting without residue
• Compatible with Adin Noris AB Dental and MIS implant systems sharing common geometry
• Accurate machined tolerances ensure a precise fit at the implant abutment interface
• Cost effective solution for laboratories producing custom cast abutments in bulk

Specifications

• Brand: Dentaltech
• Component Type: Non hex CCM castable
• Base Material: Titanium alloy
• Sleeve Material:Burnout plastic
• Compatibility: Adin Noris AB Dental MIS
• Connection Type: Internal non hex
• Anti Rotation: No rotational lock
• Size: Height-14mm, Hex Diameter-2mm
• Casting Compatibility: Non precious and precious alloys
• Use Type: Laboratory procedure
• Screw Included: Not included separately

Packaging

• 1 x Dentaltech Adin Noris AB Dental and MIS Compatible Non Hex CCM

Directions for Use

Preparation

• Inspect the CCM component for any damage or contamination before starting the procedure
• Verify compatibility with the specific implant system used in the case
• Mount the non hex CCM onto the corresponding implant analog in the working model

Wax Up

• Wax up the custom abutment shape over the burnout plastic sleeve as per clinical design
• Maintain adequate wax thickness to support the final bridge or splinted restoration
• Preserve the metal base undisturbed during the wax up to protect the precision interface

Casting

• Sprue and invest the wax pattern following standard laboratory casting protocol
• Burn out the plastic sleeve completely to ensure clean metal flow during casting
• Cast using compatible alloys while keeping the titanium base outside the casting flame
• Divest and clean the cast abutment carefully without damaging the metal base

Post Casting

• Finish and polish the cast portion of the abutment while protecting the metal base interface
• Try the finished abutment on the model and verify the precision of the connection fit
• Proceed with final bridge or full arch restoration fabrication over the completed abutments
• Clean and prepare the abutments for clinical delivery as per standard protocol

Additional Information

Country of Origin: India

Manufacturer:
Kamal Encon Industries Limited
Plot No. 917, IMT Faridabad, Sector 68, Faridabad , 121001, India
Phone: +91 72899 99456

Packer:
Kamal Encon Industries Limited
Plot No. 917, IMT Faridabad, Sector 68, Faridabad,121001, India
Phone: +91 72899 99456

Marketed By:
Vasa Denticity Ltd.
Khasra No. 15/1, Mustil No. 6, Village Dabodha, Farrukhnagar, Gurugram, Haryana , 122506, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this.