Xcem Osspore Gelatin Foams

Description

Key Features

• Designed to control bleeding efficiently by promoting clot formation and providing immediate hemostatic support during oral and dental surgeries.
• Can be used either dry or moistened, offering flexibility based on the surgical conditions and surgeon’s preference. Dry use involves rolling and compressing to fit the cavity, while moistened use involves swelling and preparing the foam in isotonic saline.
• Made from biocompatible gelatin, ensuring compatibility with bodily tissues and reducing the risk of adverse reactions.
• The foam can be cut to fit various wound sizes and shapes, allowing for precise application tailored to the specific needs of the surgical site.
• Comes prepackaged sterile, ensuring a clean and safe product for single-use applications. Maintains sterility until the package is opened.
• Intended for single-use applications, reducing the risk of contamination and ensuring optimal performance with each use.

Specifications

• Category: Hemostatic Agent
• Type: Foams
• Indication: To achieve hemostasis after surgical procedures
• Composition: Gelatin
• Size: 1cm x 1cm x 1cm 
• Sterile / Non – Sterile: Sterile 

Packaging

Xcem Osspore Gelatin Foam 1cm x 1cm x 1cm (9 Pcs) – XOGF100

• 9/pack

Xcem Osspore Gelatin Foam 1cm x 1cm x 1cm (10 Pcs) – XOGF101

• 10/pack

Directions for Use

Preparation:

• For Dry Use:

  • Cut the Osspore Gelatin Foam to the desired size.
  • Roll the foam gently between your fingers and lightly compress it to approximate the diameter of the cavity or socket to be filled.

• For Moistened Use:

  • Cut the foam to the desired size.
  • Immerse the foam in an isotonic sodium chloride solution.
  • Remove the foam from the solution and squeeze it thoroughly to expel air bubbles trapped in the meshes.
  • Return the foam to the solution to allow it to swell to its original size.
  • Remove the foam from the solution and blot it on sterile gauze to remove excess fluid.

2. Application:

• For Dry Foam:

  • Insert the rolled foam into the cavity or socket.
  • Apply light finger pressure for one to two minutes to ensure proper placement and contact.

• For Moistened Foam:

  • Place the moistened foam into the cavity or wound.
  • Apply gentle pressure to ensure full contact and proper placement.

3. Use with Thrombin:

• If using thrombin in conjunction with the foam, consult the thrombin insert for complete prescribing information and proper preparation instructions.

4. Storage and Handling:

• Store the unopened package at 25°C (77°F), with permissible excursions to 15-30°C (59-86°F) as per USP Controlled Room Temperature guidelines.
• Once opened, the product is subject to contamination. Use the foam as soon as the package is opened and discard any unused contents.
• The product is prepackaged sterile and intended for single use only.

5. Disposal:

• Dispose of used or expired foam in accordance with local medical waste disposal regulations. 

Additional Information

Country of Origin: India

Manufacturer:
DCL Dencare (India) Pvt. Ltd.
Plot No. 43, Phase IV, Udyog Vihar, Gurugram – 122015, Haryana, India
Phone: +91 72899 99456

Packer:
DCL Dencare (India) Pvt. Ltd.
Plot No. 43, Phase IV, Udyog Vihar, Gurugram – 122015, Haryana, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product