Waldent NanoFill Zirconium Composite Intro Kit

Description

NanoFill Zirconium Composite Kit is a light-cure, radiopaque composite with excellent physical properties that makes it suitable for use in both anterior and posterior restorations. The long working time helps the clinician perform the dental procedure efficiently

Composition

• Bisphenol A Glycidyl methacrylate (Bis-GMA)
• Urethane Dimethacrylate (UDMA)
• Bisphenol A diglycidyl methacrylate ethoxylated (Bis-EMA)

Indication

• NanoFill Zirconium Polymer-Based Dental Restorative Material is used for direct filing of class I, ll, lll, V and V cavities in anterior teeth.
• Class I, I, lll, IV and V cavities in posterior teeth.
• As a preventive resin restorations

Key Features

• Has high radiopacity and mechanical strength
• Superior wear resistance
• High filler load
• Packable consistency
• Low shrinkage
• Excellent colour stability
• Excellent flexural strength

Specifications

• Diametric Tensile Strength 52,4 MPa
• Degree of conversion 83%
• Flexural modulus 12,6 GPa
• Shrinkage forces 0,91 MPa
• Diamond pyramid hardness 78 kg/mm²
• Thermal expansion coefficient 22 µm/m°C
• Flexural strength Nanofill composite – 85 Mpa
• Compressive strength Nanofill composite – 250 Mpa

Packaging

• 4 x 4g Syringe A1, A2, A3, A3.5
• 1 x 5ml Bottle NanoBond Universal Adhesive
• 1 x 3g Syringe BestEtch
• Instruction Manual

Directions for Use

• Prepare the tooth: The tooth is first prepared by removing any decay or damaged tissue and cleaning the area.
• Isolate the tooth: The tooth is isolated using a rubber dam or a dental dam to prevent contamination and to keep the tooth dry.
• Apply an adhesive: An adhesive is applied to the prepared tooth surface to bond the composite filling to the tooth structure.
• Place the composite: The NanoFill Zirconium Composite is then placed into the prepared cavity using a hand instrument or a placement instrument. The composite material should be packed firmly and evenly into the cavity to ensure good adaptation and contact with the tooth structure.
• Shape and contour the composite: The composite is shaped and contoured using a dental instrument to achieve the desired anatomical form and occlusal contacts. It is important to ensure that the composite is properly contoured to prevent food accumulation and to promote proper oral hygiene.
• Cure the composite: The composite is then cured using a dental curing light. The curing time depends on the type of composite used and the manufacturer’s instructions.
• Check the bite: After the composite is cured, the bite is checked to ensure that the restoration is not interfering with the patient’s occlusion.
• Polish the composite: The final step is to polish the composite using a dental polishing system to achieve a smooth and shiny surface.

Additional Information

Country of Origin: Türkiye

Manufacturer:
Inci Dental Tibbi Malz. San. ve Tic. Ltd. ?ti.
Defterdar Mah., Otakç?lar Cad., E Blok Sit. No. 74/4, Eyüpsultan, Istanbul, Türkiye
Tel: +90 212 632 6345

Packer:
Inci Dental Tibbi Malz. San. ve Tic. Ltd. ?ti.
Defterdar Mah., Otakç?lar Cad., E Blok Sit. No. 74/4, Eyüpsultan, Istanbul, Türkiye
Tel: +90 212 632 6345

Marketed & Imported By:
Vasa Denticity Ltd.
Khasra No. 15/1, Mustil No. 6, Village Dabodha, Farrukhnagar, Gurugram, Haryana – 122506, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product.