Prime Dental Restorite Cavo Surface Sealer

Description

Prime Dental Restorite Cavo Surface Sealer

Prime Dental Restorite Cavo Surface Sealer (Restorite CSS) is an advanced light-cured, unfilled methacrylate-based resin meticulously designed to cure in an ultra-thin film, minimizing the oxygen inhibition layer. Specifically formulated to address challenges in composite restorations, Restorite CSS penetrates and seals cracks, as well as surface porosity, ensuring enhanced marginal integrity. The finishing and polishing of composite restorations often lead to microscopic defects, accelerating composite loss clinically perceived as wear. By applying Restorite CSS during restoration placement and annually thereafter, it effectively fills microscopic cracks, significantly improving the durability and longevity of composite restorations, and providing practitioners with a valuable tool for superior clinical outcomes.

Indications:

• Restorite CSS penetrates, seals cracks, and surface porosity in composite restorations. Finishing and polishing of composite develops microscopic defects in the surface, resulting in accelerated loss of composite, interpreted clinically as wear.
• Restorite CSS, applied at the restoration placement and on an annual basis, improves the marginal integrity of composite restorations by filling microscopic cracks in composite surfaces

Key Features

• Methacrylate-Based Resin: Formulated with an unfilled methacrylate-based resin, Restorite CSS provides advanced sealing properties.
• Light-Cured Technology: Utilizes light-curing technology, allowing for controlled and efficient curing with minimal oxygen inhibition layer.
• Thin Film Application: Designed to cure in a very thin film, ensuring thorough coverage while minimizing excess material.
• Crack and Porosity Sealing: Penetrates and effectively seals microscopic cracks and surface porosity in composite restorations.
• Marginal Integrity Improvement: Enhances the marginal integrity of composite restorations by filling microscopic cracks in the composite surface.
• Wear Prevention: Addresses accelerated composite wear caused by finishing and polishing procedures, promoting longevity.
• Annual Maintenance Application: Recommends annual reapplication to maintain protective benefits and address potential wear-related issues.
• Easy Application Process: Provides a straightforward application process, making it user-friendly for dental professionals.

Specifications

Storage:

• Storage Store the material away from direct sunlight. Store in a cool and dry place. Screw the cap back onto the bottle tightly after each use.

Packaging

• 1 x 5ml Bottle

Directions for Use

General:

• Take a drop of Restorite CSS on plastic coated mixing pad, glass slab or mixing well.
• Apply a thin layer of Restorite CSS with brush tip uniformly on filling / tooth surface.
• Add composite (Prime Dental has range of Restorite Composite material in Flowable, Micro Hybrid and Nano Hybrid range) following recommended placement procedures, including incremental layering to maximize bonding. Restorite CSS will function as a bonding agent between enamel or existing composite and the new composite material.
• Complete steps 2 through 6 of “New Restorations” to seal the repaired restoration.
• To seal glass ionomers or composite filling, etch, wash and dry. Place an even layer of Restorite CSS and light cure for 20 seconds once.

Precautions:

• Remove excess resin flash interproximally and subgingivally when present.
• Take care not to bond adjacent restorations together.
• Remember to establish adequate isolation before using Restorite CSS. A clean, dry field is imperative for optimal resin bonding.
• Use oil-free, moisture-free air for drying after etching.
• Any resin can be sensitizing to the patient, causing an allergic reaction if the individual is already sensitized. Wash exposed area completely to remove the material. If dermatitis, rash or any other allergic reaction is observed, consult a physician.

Procedure for New Restoration:

• Contour composite restoration, finishing, and polishing to the desired surface texture with Prime Dental’s Aster Compo. Adjust occlusion as needed.
• Isolate tooth or teeth being sealed.
• Clean restoration. All composite surfaces are to be sealed and adjacent tooth surfaces are etched for 20 seconds with etching gel (use Prime Dental’s Restorite Etching Gel), then rinsed and dried.
• Rub a thin layer of Restorite CSS for 5 seconds into the surface of the composite and adjacent enamel. Adjust brush length to vary the brush width for most effective use. Longer brush fibers will allow for greater fanning of fibers, resulting in a wider spread of resin per brush stroke.
• Gently air thin. Light cure Restorite CSS for 20 seconds.
• Evaluate occlusion for prematurities.

Procedure for Previously placed composites:

• Clean surfaces and margins to be sealed thoroughly with Prime Dental’s Aster Compo and rinse thoroughly.
• Etch the enamel immediately adjacent to the restoration and all accessible composite surfaces for 20 seconds.
• Complete steps 2 to 6 of “New Restorations” for sealing.
• When defects are too large to be filled, follow composite bonding and repair.

Procedure for Composite bonding and repair:

• Thoroughly clean surfaces and margins to be sealed. Freshen surfaces with a high-speed bur (Use Prime Dental’s ACE burs) and rinse.
• Remove weakened portions of damaged, existing composite. Open defect to be repaired to limit air entrapment during placement of new composite.
• Etch the enamel immediately adjacent to the restoration and all accessible composite surfaces with etching gel for 15 seconds.
• Complete steps 2 to 6 of “New Restorations” for sealing.

Additional Information

Country of Origin: India

Manufacturer:
PRIME DENTAL PRODUCTS PVT LTD
Plot No. A-148,Road No. 24,MIDC, Wagle Industrial Estate, Thane (W), Thane Maharashtra India
Phone: +91 72899 99456

Packer:
PRIME DENTAL PRODUCTS PVT LTD
Plot No. A-148,Road No. 24,MIDC, Wagle Industrial Estate, Thane (W), Thane Maharashtra India
Phone: +91 72899 99456

Marketed By:
PRIME DENTAL PRODUCTS PVT LTD
Plot No. A-148,Road No. 24,MIDC, Wagle Industrial Estate, Thane (W), Thane Maharashtra India
Phone: +91 72899 99456