Prevest Denpro CeraEtch Etching Gel – 1.2ml (10012)

Description

CeraEtch Etching Gel by Prevest DenPro is a high-performance etching gel designed for effective conditioning of ceramic, porcelain, and enamel surfaces prior to bonding procedures. Formulated with 5% hydrofluoric acid, it ensures precise etching, enhancing surface roughness and promoting superior adhesion of bonding agents, composites, or veneers.

The gel features a controlled viscosity for accurate application and easy handling, minimizing the risk of accidental spread. Its vibrant color ensures excellent visibility during use, allowing precise placement and thorough rinsing. CeraEtch is packaged in convenient syringes with fine applicator tips for targeted delivery, making it an essential tool for aesthetic and restorative dental procedures. Safe and efficient, it ensures optimal bond strength and long-lasting restorations.

Indications

• Repair of porcelain restorations
• Cementation of porcelain restorations

Key Features

• Repair of porcelain restorations
• Cementation of porcelain restorations
• Formulated with 5% hydrofluoric acid for effective etching.
• Enhances adhesion by increasing surface roughness of ceramics and enamel.
• Controlled viscosity prevents running for precise application.
• Brightly colored gel ensures visibility during application and rinsing.
• Convenient syringe packaging with fine applicator tips for accuracy.
• Easy to apply and rinse, ensuring a clean surface for bonding.
• Suitable for use in aesthetic and restorative dental procedures.
• Promotes long-lasting restorations with superior bond strength.

Specifications

• Composition: Contains 5% hydrofluoric acid for effective etching.
• Viscosity:Gel viscosity 
• Safety: Easy to rinse off, leaving a clean surface for bonding.
• Sterility: Packaged to maintain sterility and usability in clinical settings.
• Store at temperature between 10°C to 24°C.
• Close the cap carefully after use.
• Keep away from moisture.
• Shelf life not affected after opening if stored in a cool dry place.

Packaging

Prevest Denpro CeraEtch Etching Gel – 1.2ml

• 1 x 1.2ml Syringe
• 5 x Applicator Tips
• 1 x Instruction Manual

Prevest Denpro CeraEtch Etching Gel – 10ml

• 1 x 10ml Bottle
  1 x Instruction Manual

Directions for Use

• Protective eye wear must be worn by the practitioner and patient and protecting gloves must be worn by the practitioner.
• Isolate the area to be etched with a rubber dam. Apply gingival barrier around the area to be etched.
• Remove cap from the CeraEtch syringe and attach dispensing tip and check the etchant flow
  through the tip before applying intra orally. Apply etchant to the dry porcelain for 90 seconds.
• Suction the porcelain etchant and rinse with a copious amount of water and air dry. The etched
  surface should dull and frosty.
• Apply 1– 2 thin coats of Silane-X with a brush tip applicator to the etched surface and allows to dry for 30 seconds.
• Apply Renew Universal / Total Etch Bonding adhesive and follow the instructions for bonding and restorative with composites or cements.

Warning :-

Read the instructions thoroughly before use of this product. Hydrofluoric acid is a very powerful chemical and extreme care must be taken while handling this product.

Additional Information

Country of Origin: India

Manufacturer:
Prevest DenPro Limited
EPIP Kartholi, Bari Brahmana, Jammu 181133, Jammu and Kashmir, India
Phone: +91 72899 99456

Packer:
Prevest DenPro Limited
EPIP Kartholi, Bari Brahmana, Jammu 181133, Jammu and Kashmir, India
Phone: +91 72899 99456

Marketed By:
Prevest DenPro Limited
EPIP Kartholi, Bari Brahmana, Jammu 181133, Jammu and Kashmir, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product