Maarc Bite Registration Wax (2202/010)

Description

Bite Registration sheets are dimensionally stable, does not shrink or distort. Bite Registration Wax when heated at 55 degree C it turns in to Dead Soft in less than 1 minute. This wax adapts to every details and sets by water or room temperature i.e. 27 degree C.

It is used to record bite while doing dental procedures. They are ideal for checking and maintaining accurate occlusal records

Thickness 1.7 mm to 2.0 mm.

Size160 mm X 90 mm

INDICATIONS:

• Wax used for bite registration during inter occlusal check records

Key Features

• Bite Registration Wax sheets contains Aluminium particles which gives even heating
• Bite Registration Sheets are dimensionally stable, does not shrink or distort
• Bite Registration Wax are ideal for checking and maintaining accurate occlusal records
• Bite Registration Wax when heated at 55°C it turns in to ‘Dead Soft’ in less than 1 minute
• This Wax adapts to every details and sets by water or room temperature i.e. 27°C.

Specifications

• Material: High-quality, non-toxic wax formulation.
• Thickness: Available in various thicknesses for customized bite registration.
• Texture: Smooth and pliable, allowing for easy manipulation.
• Temperature Sensitivity: Remains stable at room temperature, softens with warmth.
• Adhesion: Excellent adhesion properties to dental surfaces.
• Compatibility: Suitable for use with various impression materials and dental procedures.
• Pack Size: Available in different pack sizes to meet clinical needs.

Packaging

• Pack of 10 sheets

Directions for Use

• Preparation: Ensure all instruments and materials are clean and ready for use. Warm the wax slightly if it is too firm for manipulation.

• Cutting the Wax: Cut an appropriate size of the bite registration wax based on the patient’s arch and requirements.

• Softening: If necessary, gently warm the wax in your hands or with a warm instrument to make it more pliable.

• Placement: Position the softened wax between the upper and lower dental arches where the bite registration is needed.

• Bite Registration: Instruct the patient to gently close their mouth into a natural bite position, ensuring the wax captures the occlusion accurately.

• Setting Time: Allow the wax to cool and set in place for a few moments until it hardens.

• Removal: Carefully remove the wax registration from the patient’s mouth, ensuring not to distort the captured bite.

• Storage: Store any unused wax properly to maintain its integrity for future use.

Additional Information

Country of Origin: India

Manufacturer:
AADI MED PVT. LTD.
214 BLUEBELL INDUSTRIAL ESTATE CHINCHPADAWALIV,VASAI EAST,VASAI-VIRAR, VASAI EAST, WALIV, VASAI
Phone: +91 72899 99456

Packer:
AADI MED PVT. LTD.
214 BLUEBELL INDUSTRIAL ESTATE CHINCHPADAWALIV,VASAI EAST,VASAI-VIRAR, VASAI EAST, WALIV, VASAI
Phone: +91 72899 99456

Marketed By:
AADI MED PVT. LTD.
214 BLUEBELL INDUSTRIAL ESTATE CHINCHPADAWALIV,VASAI EAST,VASAI-VIRAR, VASAI EAST, WALIV, VASAI
Phone: +91 72899 99456

Warranty & Service

Warranty is not applicable for this product