DentGist NanoCom Composite Kit

Description

DentGist Composite Kit is a visible light cured, radiopaque highly filled composite restorative material for anterior and posterior restorations of all teeth. The Composite Kit has 4 packable composite syringes and one bonding agent with 2g etching gel.

DentGist Nano-Bond is a light curing, one component 5th generation bonding agent for use in combination with adhesive restorations. Nano-Bond adhesive was developed for bonding composites and compomers to the tooth structure as well as for bonding indirect restorations (e.g., porcelain). The adhesive incorporates aspects of a primer and bonding resin in a single bottle. Prior to the application of Nano-Bond, the tooth structure is conditioned with Etchant gel 37%.

Indications: 

• Direct filling of class I, II, III, IV and V Cavities in anterior and posterior teeth.
  
• Preventive resin restoration and repair of composite / ceramic veneers.

Key Features

• Ease of use 
• Easy adaptation to cavity preparation
• Does not stick to the composite filling instruments
• Exceptional radiopacity
• Packable consistency
• Allows easy contouring to achieve desired shape before light curing
• Excellent color stability
• Durable restorations and maintain a gloss shine for long time
• It can be polished to a high gloss finish ensuring optimum esthetics 
• Universal use for anterior and posterior restorations

Specifications

Composition of nano-hybrid composite :

• Bisphenol A Glycidyl Methacrylate,
• Bisphenol A Diethoxy Methacrylate,
• Urethane Dimethacrylate,
• Triethylene Glycol Dimethacrylate,
• Silanated Barium Glass Powder,
• Amorphous Fumed Silica

Composition of bonding agent :

• Urethane Dimethacrylate,
• Triethylene Glycol Dimethacrylate,
• Bisphenol A Diglycidyl Methacrylate,
• 2-HydroxyEthyl Methacrylate,
• Tertiary Butanol,
• Photoinitiators,
• Stabilizer

Composition of etchant : 37% phosphoric acid gel

Shelf Life : 3 years from the date of manufacturing.

Packaging

• 4 x 4g Composite Syringe (A1. A2. A2. A3)
• 1 x 2g Etch
• 1 x 5ml Bond

Directions for Use

• Isolation : Rubber dam is the preferred method of isolation
• Cavity preparation : Prepare cavity with minimal tooth reduction. Bevel cavo surface enamel margins.
• Apply Etchant Gel to enamel and dentin surfaces for 15 seconds. Rinse thoroughly for 15 seconds with water
• Dry with clean, oil-free, air without desiccating the dentin
• Do not allow etched surface to become contaminated with saliva or blood during the bonding procedure
• Adhesive : Immediately after blotting, apply 2-3 consecutive coats of adhesive to etched enamel and dentin for 15 seconds with gentle agitation using a fully saturated applicator. Remove excess solvent by gently drying with dry air for at least 5 sec to ensure uniform glossy surface. Light cure for 20-30 seconds
• Remove composite syringe cap and dispense material onto a mixing pad
• Place the material into the cavity using a suitable placement instrument.
• After dispensing, screw plunger should be rotated anticlockwise by half to full turn to release residual pressure inside the syringe
• Contour the material in the cavity.
• Light cure for 40 sec using standard curing light. 
• When necessary build in increments of 2mm maximum using a layering technique.
• Shape and polish with a Polishing system using standard technique. 

Additional Information

Country of Origin: India

Manufacturer:
Rident Denpro Pvt. Ltd.
Plot No. 40, Vrindavan Nagar, Behind Jain Temple, Boranada Special Economic Zone, Rajasthan, India

Packer:
Rident Denpro Pvt. Ltd.
Plot No. 40, Vrindavan Nagar, Behind Jain Temple, Boranada Special Economic Zone, Rajasthan, India

Marketed By:
Vasa Denticity Ltd.
Khasra No. 15/1, Mustil No. 6, Village Dabodha, Farrukhnagar, Gurugram, Haryana – 122506, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product.