Dentaltech Multi Unit Straight Abutment ∅4.6mm X G/H1.5mm – Straumann NC Implant Compatible

Description

The Dentaltech Multi Unit Straight Abutments for Straumann NC are precision-engineered prosthetic components placed directly onto Straumann Bone Level implants with the Narrow CrossFit (NC) connection to convert them into a screw-retained prosthetic platform. Specifically dimensioned for narrow-diameter implants used in lower anteriors and limited-ridge sites — typically 3.3 mm NC implants — these abutments enable All-on-4, All-on-6, and hybrid full-arch workflows even when narrower implants are part of the case plan. The straight (0°) configuration is selected when the implant trajectory is favorably aligned with the planned prosthesis. With a consistent Ø4.6 mm head and gingival heights of 1.5 mm or 4.5 mm, the range covers thin to thick soft tissue scenarios. Once seated and torqued onto the NC implant, the abutment accepts multi unit healing components, impression copings, and the final screw-retained superstructure.

Key Features

• Multi unit straight abutment engineered for Straumann Bone Level NC (Narrow CrossFit) implants
• Specifically dimensioned for narrow-diameter 3.3 mm Straumann implants in limited-ridge sites
• Straight 0° configuration suited to favorably aligned implant trajectories
• Converts the NC implant into a screw-retained prosthetic platform for full-arch workflows
• Consistent Ø4.6 mm head ensures uniform prosthetic interface across gingival height variants
• Two cuff height options (1.5 mm and 4.5 mm) cover thin to thick gingival biotypes
• Precision-machined from grade 5 titanium alloy for strength and biocompatibility
• Essential for full-arch cases including narrow-diameter implants in the anterior arch

Specifications

• Product Type: Multi Unit Straight Abutment
• Brand: Dentaltech
• Compatibility: Straumann Bone Level NC (Narrow CrossFit)
• Angulation: Straight (0°)
• Head Diameter: Ø4.6 mm (both variants)
• Available Gingival Heights (G/H): 1.5 mm, 4.5 mm
• Material: Grade 5 titanium alloy
• Manufacturing: Precision-machined
• Connection: Straumann NC CrossFit
• Indication: Full-arch, All-on-4, All-on-6, hybrid bridge, and multi-implant cases including narrow-diameter implants
• Workflow: Receives multi unit healing abutments, impression copings, and screw-retained prostheses
• Sterilization: Autoclavable

Packaging

• 1 x Multi Unit Straight Abutment

Directions for Use

Case Planning

• Confirm the case includes Straumann Bone Level implants with Narrow CrossFit (NC) connections
• Evaluate the implant trajectory and confirm a straight multi unit abutment is appropriate
• Measure the gingival thickness at each NC implant position and select the matching G/H variant
• Verify abutment selection radiographically and against the surgical plan before placement

Abutment Placement

• Confirm the NC implant is fully osseointegrated and the connection is clean and free of debris
• Inspect the multi unit abutment for visible damage and sterilize before placement
• Align the abutment with the Straumann NC CrossFit connection and seat fully into the implant
• Hand-tighten the abutment to confirm initial engagement
• Apply final torque using the appropriate torque wrench at the value recommended by Straumann for NC multi unit abutments
• Verify radiographic seating to confirm complete adaptation to the implant platform

Healing and Soft Tissue Maturation

• Place a compatible multi unit healing abutment onto each multi unit abutment
• Allow the soft tissue to heal and shape around the healing abutments for the recommended period
• Schedule recall visits to monitor soft tissue maturation and oral hygiene

Prosthetic Phase

• Remove the healing abutments at the impression appointment
• Place the multi unit impression copings and take the impression at the abutment level
• The laboratory uses multi unit lab analogs to recreate the abutment position on the master cast
• Fabricate the screw-retained prosthesis on the master model and deliver back to the clinic
• Seat the final prosthesis onto the multi unit abutments and torque the prosthetic screws as specified

Storage

• Store unused abutments in their original packaging in a clean dry environment
• Check packaging integrity before each use and confirm expiry as applicable

Additional Information

Country of Origin: India

Manufacturer:
Kamal Encon Industries Limited
Plot No. 917, IMT Faridabad, Sector 68, Faridabad , 121001, India
Phone: +91 72899 99456

Packer:
Kamal Encon Industries Limited
Plot No. 917, IMT Faridabad, Sector 68, Faridabad,121001, India
Phone: +91 72899 99456

Marketed By:
Vasa Denticity Ltd.
Khasra No. 15/1, Mustil No. 6, Village Dabodha, Farrukhnagar, Gurugram, Haryana , 122506, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not aplicable for this product.