Mani Tooth Sectioning Surgical Carbide Airotor Burs 1559L | 28mm Length (Pack of 4)

Description

MANI Carbide Bur 1559L is a precision-engineered airotor carbide bur used for efficient and controlled tooth sectioning, particularly during impacted tooth extraction procedures. It features a tungsten carbide working part and a stainless steel FG shank, ensuring durability, stability, and high cutting efficiency in airotor handpieces. The spiral-shaped twisted blades allow continuous cutting with reduced vibration, while the cross-cutting design enhances cutting performance and control. A shortened working length of 6 mm helps reduce the risk of entangling adjacent soft tissues, improving procedural safety. The MANI 1559L bur is available in two overall length variants—25 mm and 28 mm—allowing clinicians to select the preferred length while maintaining consistent cutting design and diameter.

Key Features

• Airotor-compatible carbide bur with FG shank
• Designed specifically for tooth sectioning during impacted tooth extraction
• Tungsten carbide working part ensures high cutting efficiency and durability
• Spiral-shaped twisted blades enable smooth, continuous cutting
• Cross-cutting design improves cutting performance and control
• Cutting tip allows precise and controlled sectioning
• Reduced vibration compared to conventional sectioning burs
• Short working length (6 mm) helps minimize risk to adjacent soft tissues
• Available in two overall length variants: 25 mm and 28 mm

Specifications

• Brand: MANI
• Product Type: Airotor Carbide Sectioning Bur
• Product Code: 1559L
• Material (Working Part): Tungsten Carbide
• Shank Material: Stainless Steel
• Shank Type: FG (Airotor)
• Indication: Tooth sectioning / impacted tooth extraction
• Bur Shape: Straight fissure with rounded end
• Working Length: 6 mm
• Maximum Diameter: 1.4 mm
• Overall Length Variants: 25 mm and 28 mm
• Recommended Speed: Up to 120,000 rpm
• Pack Size: 4 pieces per pack

Packaging

• Pack of 4

Directions for Use

1. Handpiece Compatibility

• Use only with a compatible FG (airotor) handpiece.
• Ensure the handpiece is in proper working condition.

2. Bur Placement

• Insert the bur fully into the handpiece chuck.
• Confirm it is securely seated and locked before activation.

3. Operating Speed

• Operate at the recommended speed, not exceeding 120,000 rpm.
• Excessive speed may lead to bur damage or tissue injury.

4. Cooling & Irrigation

• Always use adequate water spray during operation.
• Prevents overheating of the tooth and surrounding tissues.

5. Cutting Technique

• Apply light, controlled pressure for effective tooth sectioning.
• Avoid forcing the bur to minimize vibration and improve precision.

6. Safety Precautions

• Avoid excessive lateral pressure to prevent bur fracture.
• Exercise caution near adjacent soft tissues and anatomical structures.

7. Post-Use

• Care Clean and sterilize the bur following standard clinical protocols.
• Inspect before reuse and discard if wear or damage is detected.

Additional Information

Country of Origin: Vietnam

Manufacturer:
Mani Hanoi Co., Ltd. Pho Yen Factory
Vang Residential Group, Tan Huong Ward, Pho Yen City, Thai Nguyen Province, Vietnam
Phone: +91 72899 99456

Packer:
Mani Hanoi Co., Ltd. Pho Yen Factory
Vang Residential Group, Tan Huong Ward, Pho Yen City, Thai Nguyen Province, Vietnam
Phone: +91 72899 99456

Importer:
Mani Medical India Private Limited
C-14, First Floor, Okhla Industrial Area, Phase II, Tughlakabad, New Delhi 110020, India

Warranty & Service

No warranty applicable on this product.