Woodpecker Ultrasonic Scalar & Air Polisher PT-A

Description

Woodpecker PT-A is an advanced dual-function dental device that integrates ultrasonic scaling and air polishing into a single, compact system designed for comprehensive dental hygiene and periodontal treatment. With its intelligent handpiece recognition, it automatically switches between scaling and polishing modes based on the handpiece selected, offering seamless operation for clinicians.

This all-in-one device is ideal for a range of procedures including supragingival and subgingival scaling, periodontal therapy, endodontic irrigation, and cosmetic polishing. The unit features a user-friendly touchscreen LCD panel for intuitive control and real-time monitoring of water flow, power, and air pressure settings.

The ultrasonic handpiece delivers high-frequency vibrations with a rounded tip trajectory to ensure effective yet painless scaling without damaging enamel or cementum. Meanwhile, the air polishing system uses sodium bicarbonate-based powders to gently remove plaque and stains from both natural teeth and orthodontic appliances, even preparing surfaces for bonding, restorations, or whitening procedures.

Engineered for efficiency and hygiene, the PT-A features detachable, autoclavable handpieces, a three-piece air polishing nozzle, and a cone-structured powder tank to reduce residual powder. It supports chemical irrigation using solutions like chlorhexidine, hydrogen peroxide, and sodium hypochlorite, improving the effectiveness of root canal and periodontal treatments.

Key Features

• Dual functionality: Ultrasonic scaler + Air polisher in one unit
• Intelligent handpiece recognition with auto mode switch
• Touchscreen LCD for easy operation and settings control
• Rounded vibration tip for simultaneous painless scaling and polishing
• Titanium alloy tips – safe for enamel and cementum
• Supports chemical irrigation (e.g., NaOCl, H₂O₂, CHX)
• Automatic frequency tracking for consistent performance
• Three-piece air polishing handpiece – easy to clean and sterilize
• Side-cone powder tank minimizes powder residue
• Autoclavable handpieces at 134°C and 0.22 MPa
• Microcomputer-controlled for precise and efficient operation
• Multi-function foot pedal with adjustable power and water/air levels

Specifications

• Model: PT-A
• Power Adapter Input: 220–240V~ 50Hz/60Hz, 400mA
• Power Adapter Output: 25V~ 50Hz/60Hz, 2.8A
• Main Unit Input: 25V~ 50Hz/60Hz, 2.8A
• Output Vibrating Frequency (Ultrasonic Tip): 30±5 kHz
• Max Vibration Amplitude of Tip: 90μm (±50%)
• Output Power (Tip): 3W–20W
• Semi-offset Force (Max): 5N (±50%)
• Water Inlet Pressure: 1–5 bar (0.1–0.5 MPa)
• Air Inlet Pressure: 5.5–7.5 bar (0.55–0.75 MPa)
• Water Outlet Temperature (Air Polishing System): 0–45°C
• Main Unit Dimensions: 330mm × 280mm × 120mm
• Handpiece Sterilization: Autoclavable at 134°C, 2.0–2.3 bar
• Operation Mode: Continuous Operation
• Electric Shock Protection Class: Class I, B-type Applied Part
• Waterproof Rating: IPX0 (Main Unit), IPX1 (Foot Pedal)

Fuses:

• Main Unit: T5AH 250V
• Power Adapter: T1.0AL 250V

Operating Environment:

• Temperature: +5°C to +40°C
• Relative Humidity: 30%–75%
• Atmospheric Pressure: 70kPa–106kPa
• Cooling Water Temperature: +5°C to +25°C

Packaging

• 1 x Main unit
• 1 x Ultrasonic handpiece
• 1 x Multi-functional foot pedal
• 1 x Power adapter
• 1 x Tip P59
• 2 x Water bottle
• 2 x Needle
• 2 x Water pipe Air pipe
• 2 x Powder tank
• 2 x Air polishing handpiece
• 2 x Torque wrench
• 3 x Torque wrench

Directions for Use

Directions for Use – Woodpecker PT-A Ultrasonic Scaler & Air Polisher

Initial Setup

• Unpack the unit and place it on a stable, flat surface.
• Connect the power adapter to the main unit and plug it into a grounded power outlet.
• Attach the external air pipe to the air intake connector at the back of the device.
• Insert the foot pedal plug into the corresponding socket.
• Connect the ultrasonic handpiece to the left port and the air polishing handpiece to the right port.

Using the Ultrasonic Scaling Mode

• Pick up the ultrasonic handpiece; the device will automatically enter Ultrasound System Mode.
• Select the desired mode on the touchscreen (Scaling, Perio, or Endo).
• Choose the appropriate tip and tighten it using the torque wrench.
• Select the water supply mode (bottle or direct line) and adjust water volume as needed.
• Press the Foot Pedal A to activate tip vibration with water spray. Adjust power level based on clinical need.
• Gently glide the tip parallel to the tooth surface without applying excessive pressure.
• After use, allow water to flush through the tip for 30 seconds before disassembling.

Using the Air Polishing Mode

• Fill the powder tank with suitable air-polishing powder within the indicated Min–Max level.
• Securely install the powder tank and pick up the air polishing handpiece; the system auto-switches to Air Polishing Mode.
• Adjust water volume and air pressure via the touchscreen (start at level 5 for water, level 1 for air).
• Use Foot Pedal A to initiate air-polishing spray. Maintain a 3–5mm distance from tooth surface at a 30°–60° angle.
• Use small circular motions and avoid direct spraying on gums or periodontal pockets.
• Employ high-speed suction during the procedure to evacuate mist and particles.
• After polishing, set water to maximum and perform a final rinse polish on all teeth.

Cleaning Mode (Internal Flushing)

• Fill the water bottle with distilled or demineralized water.
• Pick up each handpiece one at a time and press the “Cleaning” button on the screen.
• Activate flushing using Foot Pedal D; the unit will clean automatically for 20–30 seconds.
• Repeat for both handpieces to ensure all internal tubing is rinsed and powder residue is cleared.

Sterilization Instructions

• Detach ultrasonic and air polishing handpieces before sterilization.
• Autoclave at 134°C for at least 4 minutes using a fractional pre-vacuum steam sterilizer.
• Avoid using hot air, radiation, or chemical sterilization methods such as ethylene oxide or plasma.

Warranty & Service

• Manufacturer/Importer warranty of 2 years against manufacturing defect
• Service and Warranty are handled by the manufacturer/importer directly for this product.
• Dentalkart will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
• Dentalkart and the Buyer acknowledge that the Products purchased/used are a subject matter of original Manufacturer/Importer’s warranties only
• Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Dentalkart may assist the customer in registering a request to get the Product replaced or serviced. 
• The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.