Waldent FlexiPrint Chromatic Dust Free Alginate Impression Material

Description

Waldent FlexiPrint Alginate is a high-precision alginate impression material for detailed reproduction of dental impressions.

FlexiPrint is a dust free, homogenous, three phase chromatic, thixotropic impression material with a pleasant banana flavour. It has normal working & setting time and is indicated for removable prothesis, study models, antagonists in the fixed and removable prosthesis.

It exhibits fast absorption of water which enhances the ease of mix. The final mix of the impression material is a homogenous mass with smooth surfaces. The impression can be stored for a long time before pouring the casts. The banana flavour increases patient comfort while recording the impressions.

The chromatic variation provides the practitioner with a visual guide during the different phases:

• Green during powder stage
• Purple during the mixing and working phase
• Green during setting phase

Indications :

• Removable prosthesis
• Study models
• Temporary crown & bridges impression

Advantages :

• Banana Flavored
• Elastic impression
• Three phase chromatic
• Optimum dimensional stability
• High precision for detailed reproduction

Key Features

• Colour change pattern: Chromatic
• Banana flavour: High patient acceptance rate
• Dust-free formulation
• Thixotropic
• Improved impression storage time
• Suitable for manual or automatic mixing
• Easy to mix with fast water absorption properties

Specifications

• Powder:  Uniform consistency, homogenous ,free from impurities
• P/W ratio: 16g powder : 36ml water
• Flavour: Banana
• Total working time: 1min 30sec
• Setting time: 2.00 – 3.00 mins
• Tear strength: ≥0.38N/mm
• Strain in compression: 5-20%
• Recovery from deformation: ≥95%
• Compatibility with gypsum
• Accurate detail reproduction(upto 50μm)

Packaging

•  1 x FlexiPrint Alginate 454gm

Directions for Use

• Measure out the amount of water needed for the impression according to the instructions provided on the package.
• Pour the measured water into a mixing bowl.
• Mix Waldent FlexiPrint Alginate Impression impression material thoroughly using a spatula or mixing device until it forms a smooth and homogeneous mixture. 
• Seat the tray in the patient’s mouth and ask the patient to bite down gently but firmly.
• Leave the impression material in the patient’s mouth for the recommended time, according to the instructions on the package.
• Gently remove the impression tray from the patient’s mouth.
• Allow the impression to dry completely before pouring the dental stone or plaster to create a model.

Additional Information

Country of Origin: Türkiye

Manufacturer:
Inci Dental Tibbi Malz. San. ve Tic. Ltd. ?ti.
Defterdar Mah., Otakç?lar Cad., E Blok Sit. No. 74/4, Eyüpsultan, Istanbul, Türkiye
Tel: +90 212 632 6345

Packer:
Inci Dental Tibbi Malz. San. ve Tic. Ltd. ?ti.
Defterdar Mah., Otakç?lar Cad., E Blok Sit. No. 74/4, Eyüpsultan, Istanbul, Türkiye
Tel: +90 212 632 6345

Marketed & Imported By:
Vasa Denticity Ltd.
Khasra No. 15/1, Mustil No. 6, Village Dabodha, Farrukhnagar, Gurugram, Haryana – 122506, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product.