VENUS V-20 V (Pack of 10)

Description

• V-2200 series respirators include V2210 V, V-20 V & V-2230 SLV respirators.
• The respirators are of convex shape design with double shell to provide protection and comfortable fit to the user.
• V-2200 series respirators have superior micro-fine media technology which protects the user from respirable suspended particulate matter. The filters have a high dust holding capacity which do not get clogged there by increasing the respirators life.
• V-2200 series respirators have Venus’s Stay cool butterfly vent valve which provides superior breathing comfort by removing built up heat inside the mask and aides in easy communication. These respirators also come with a special transparent valve cap to demonstrate the performance of the valve.
• V-2200 series respirators have braided textile elastic which diminishes the risk of skin allergy and does not deform with repeat wears under high temperature.
• These respirators have the headband sewn on the outside filter media to avoid puncture in the filter area and provide a leak proof fit.
• V-2200 series of respirators have unique fit adjusters which provide optimum fit & comfort.
• V-2200 series of respirators have a moldable aluminium nose clip to provide perfect fit to the user.
• Venus V-2230 SLV has multiple shell design which aids in use for multiple shits and lasts longer.

Key Features

Superior Technology

Micro Fine Filter media

• Protects micro-fine respirable suspended particulate matter
• High dust holding capacity
• Doesn’t let the filter clog thereby increasing the respirator’s life

Multiple Shells (V2230)

• The design aids used for multiples shift
• Lasts longer

Elastic sewn outside filter media

• Leakproof 
• Avoids puncture in filter area

Stay cool butterfly vent valve

• Provides breathing comfort and promotes easy communication
• Effectively removes heat build-up

Alluminum nose clip 

• Mouldable clip to get comfortable and perfect fit

Braided textile elastic

• Diminishes risk of reactions to skin allergy
• Does not defom with repeat wears,high temperature

Unique fit adjusters

• Provides optimum
• protection and comfort

Color coded fittings

• Allows easy identification
• Denotes the level of protection

Transparent valve

• Transparent valve clearly demonstrates the performance of valve It also supports fir verification

Specifications

The following materials are used in the
production of V-2210 V, V-20 V & V-2230 SLV
respirators.

• Straps : Textile-Braided spandex
• Nose Foam : Polyester/PVC
• Nose Clip : Aluminum
• Filter : Polyester/polypropylene
• Valve : Polypropylene /polycarbonate
• Adjustor clip : Polypropylene
• Valve Diaphragm : Polyisoperene
• These products do not contain
  components made from natural rubber
  latex
• Approximate Minimum mass of
  products:
  V-2210 V – 14g
  V-20 V – 19g
  V-2230 SLV – 18g

Precautions:

• Do not use for protection against Gases, Vapor or in atmospheres containing less than 17% Oxygen.

• Do not use with beard or other facial hair that prevent direct contact between the face and the edge of the respirator.

• Do not use when concentrations of contaminants are immediately dangerous to life and health, are unknown, or when particulate concentration exceed the maximum use level or other levels determined by your National Occupational Safety and Health Authorities.

Packaging

• Pack of 10

Directions for Use

Step 1:

Failure to follow all instructions and limitations on the use of this respirator and / or failure to wear this respirator during all times of exposure can reduce respirator effectiveness and result in sickness or death.

Step 2:

Before use, wearer must first be trained by the employer for proper respirator use in accordance with applicable Safety and Health Standards. Respiratory protection appliances are to be selected depending on the type and concentration of the hazardous substances.

Step 3:

The respirator may only be used if thetype and concentration of the harmful substances are known. In case of unknown substances or concentrations or variable conditions, breathing apparatus should be used.

Step 4:

Non-ventilated containers, mines, canals should not be entered with the particle filtering half masks & also not allowed in explosive atmosphere.

Step 5:

If the respirator becomes damaged or breathing becomes difficult, leave the contaminated area, discard and replace the respirator. Also leave the contaminated area immediately if dizziness or other distress occurs.

Additional Information

• Country of Origin: India
• Manufacturer: Venus Saflty & health Pvt.Ltd.

Warranty & Service

• Warranty is not applicable for this product.