Tokuyama Palfique LX5 Syringe Refill

Description

Palfique LX5 Syringe Refill is an advanced light-cured composite resin designed for anterior and posterior restorations, suitable for all carious classes. Comprising 82% by weight (71% by volume) of silica-zirconia filler and composite filler, it exhibits decreased polymerization shrinkage due to its high filler load. The inorganic filler, featuring spherical submicron particles (mean size: 0.2μm), ensures exceptional gloss retention and wear resistance. The monomer matrix contains Bis-GMA and Triethylene glycol dimethacrylate. Incorporating Radical-Amplified Photo polymerization initiator technology (RAP technology), PALFIQUE LX5 offers a one-third reduction in curing time compared to conventional resin composites, facilitated by a light curing unit with a wavelength range of 400 to 500nm.

Indications:

• Direct anterior and posterior restorations, including occlusal surfaces, covering all carious classes.
• Direct bonded composite veneer.
• Diastema closure.
• Repair of porcelain/composite.

Key Features

Specifications

• Quick Curing Time: 10 sec. with halogen light (≥400mW/cm2)
• Extended Working Time: 90 sec. under ambient light (10,000 lx)
• Available in many shades
• Extended working time
• Outstanding polishability

Packaging

• 1 x Palfique LX5 Syringe Refill (3.8g)

Directions for Use

Isolation:

• Isolate the treatment area using a rubber dam or other suitable isolation methods to prevent contamination.

Tooth Preparation:

• Prepare the tooth according to standard restorative procedures, removing any decay or damaged structure.

Etching and Bonding:

• Etch the tooth surface with an appropriate etchant, rinse, and apply a bonding agent as per the manufacturer’s instructions.

Application of PALFIQUE LX5:

• Dispense the PALFIQUE LX5 from the syringe onto a mixing pad. Use an appropriate instrument for placement and shaping.

Light-Curing:

• Light-cure PALFIQUE LX5 using a suitable light-curing unit. Follow the recommended curing time and ensure adequate coverage of all applied material.

Finishing and Polishing:

• Once cured, finish and polish the restoration using fine finishing burs and polishing discs to achieve the desired aesthetics.

Check Occlusion:

• Verify occlusion to ensure proper bite and adjust if necessary.

Clean Instruments:

• Clean placement instruments with alcohol after use.

Patient Instructions:

• Advise the patient to avoid chewing on hard objects immediately after the procedure.

Safety Precautions:

• Adhere to safety precautions, including the use of protective eyewear when using a light-curing unit.

Additional Information

Country of Origin: Japan

Manufacturer:
Tokuyama Dental Corporation
38-9, Taitou 1-chome, Taitou-ku, Tokyo 110-0016, Japan

Packer:
Tokuyama Dental Corporation
38-9, Taitou 1-chome, Taitou-ku, Tokyo 110-0016, Japan

Imported By:
ELEM Holdings India Pvt. Ltd.

Warranty & Service

• Warranty is not applicable for this product.