PrestoCraft 3D Printing Crown & Bridge Ceramic Resin – 500 Gm

Description

PrestoCraft 3D Printing Crown & Bridge Ceramic Resin is a premium-grade resin developed for the fabrication of permanent-looking dental prosthetics. Its ceramic-filled, biocompatible formula is ideal for crowns, bridges, inlays, and veneers that require superior mechanical strength and esthetics. The resin offers exceptionally high compressive and flexural strength, with values exceeding 225 MPa and 150 MPa respectively. Designed to mimic the appearance of natural dentition, it delivers excellent polishability and translucency for lifelike results. The material prints with ease thanks to its low viscosity and cures rapidly under UV light sources (385-405 nm). It is suitable for long-term provisional and semi-permanent restorations, especially when aesthetics and functional strength are critical. The variety of shade options allows dentists to match patient tooth color precisely, ensuring satisfaction and confidence in every case. Ideal for dental labs and clinics focused on advanced digital prosthetic manufacturing.

Key Features

• High compressive and flexural strength for long-term restorations
• Ceramic-like polishability with natural translucency
• Tooth-colored biocompatible formulation
• Low viscosity for easy printing and smooth finish
• Minimal odor and safe for lab or clinical environments
• Fast curing for quicker production cycles
• Compatible with standard DLP/LCD 3D printers

Specifications

• Application: Long-term Crowns, Bridges, Inlays, Veneers
• Wavelength Range: 385-405 nm
• Compressive Strength: >225 MPa
• Flexural Strength: >150 MPa
• Odor: Low
• Viscosity: Low
• Biocompatibility: Yes
• Shade: A2

Packaging

• 1 x 3D Printing Crown & Bridge Ceramic Resin – (Bottle 500Gm)

Directions for Use

Preparation

• Shake the Resin: Before pouring, gently shake the bottle to ensure even dispersion of ceramic fillers.
• Temperature Control: Ideal room temperature should be between 20°C to 28°C. Avoid printing in cold environments.
• Printer Compatibility: Ensure your printer uses LCD/DLP technology with a wavelength of 385–405 nm.
• Platform Leveling: Calibrate your printer’s build platform for consistent layer adhesion.

Resin Handling

• Pour Slowly: Transfer resin into the printer’s vat without splashing.
• Filter if Needed: Use a resin filter when reusing material to remove cured debris.

Printing Process

• Layer Height: Use 50–100 microns depending on the model detail.
• Curing Time per Layer: Adjust based on printer specs, but typically 2–4 seconds per layer with 405 nm exposure.
• Print Orientation: For bridges and crowns, angle models slightly to improve accuracy and reduce support marks.
• Supports: Use adequate supports for overhangs to prevent deformation.

Post-Processing

Cleaning:

• Rinse printed object in 95% isopropyl alcohol (IPA) for 3–5 minutes.
• Use a soft brush to remove resin from small crevices.
• Let dry completely before curing.

Post-Curing:

• Cure under UV light (385–405 nm) for 15–30 minutes depending on model size.
• Ensure even exposure by rotating the model.

Finishing:

• Polish for aesthetics using dental-grade polishers.
• Surface can be glazed or coated based on application needs.

Storage

• Store resin in the original bottle with the cap tightly sealed.
• Keep in a cool, dark place away from sunlight or UV light.
• Avoid contamination by pouring unused resin back through a fine filter.

Safety Guidelines

• Wear nitrile gloves and protective eyewear when handling the resin.
• Avoid direct contact with skin and eyes.
• Use in a well-ventilated area or with an air purifier.
• Dispose of cured waste as per local regulations.

Warranty & Service

• Warranty is not applicable for this product