Neosil Peakosil A-Silicone Putty + Light Body Combo Start Kit

Description

LIGHT BODY

Appropriate thixotropy. Smooth but does not flow down being applied on upper tooth. Because of high hydrophilicity and ideal flow, able to realize details for precise impression. High elasticity and resistance for tearing guarantees safety from negative deformation. High affinity with plaster enables detailed modeling. Compatibility with products of other manufacturers is excellent.

Non-sticky. Its viscosity is suitable for mixing it with bare hands. Patient does not feel any repulsion because it has no taste and odor. After hardened, very hard to minimize negative deformation during impression., High affinity with plaster enables detailed modeling. Oil does not ooze during mixing with bare hands.

Key Features

• Delivers accurate impressions with excellent surface detail capture

• Light body flows optimally without sagging in maxillary cases

• Putty allows easy hand mixing with zero oil bleeding

• High elasticity ensures safe removal without tearing

• No taste or odor for increased patient comfort

• Compatible with all standard plaster and stone materials

• Maintains dimensional stability to prevent negative deformation

Specifications

• Material Type: A-Silicone
• Components: Putty + Light Body
• Thixotropy: Smooth application, non-flowing on vertical surfaces
• Hydrophilicity: High
• Detail Capture: Excellent, ideal flow for precise impressions
• Elasticity: High
• Tear Resistance: High, prevents negative deformation

• Neosil Peakosil A-Silicone Putty:
• Working time: ≥ 40 sec.
• Setting time: ≤ 4 min.
• Hardness: Shore A 71
• Color: Blue
• Consistency: Type 0 (Very High)

• PEAKOSIL Light Body Regular Set:
• Working time: ≥ 40 sec.
• Setting time: ≤ 4 min.
• Hardness: Shore A 52
• Color: Yellow
  Consistency: Type 3 (Low)

Packaging

A-Silicone Putty

• 1 x 400gm Base
• 1 x 400gm Catalyst
• 1 x Scoop
• 1 x Instructions Manual

Light Body

• 2 x Silicone Base/Catalyst Cartridge 50ml
• 6 x Mixing tips

Directions for Use

• Preparation: Ensure proper preparation of the dental impression area, including cleaning and drying the teeth thoroughly.

• Mixing Putty: Take equal parts of the putty base and catalyst from the kit. Mix them thoroughly by hand until a uniform color is achieved.

• Putty Application: Place the mixed putty evenly onto the dental tray, ensuring full coverage of the impression area. Seat the tray firmly onto the teeth, making sure to capture all necessary details.

• Set Time: Allow the putty to set according to the manufacturer’s recommended time, ensuring the patient maintains a steady bite during this period.

• Removal: Gently remove the set putty tray from the patient’s mouth, taking care not to distort the impression.

• Mixing Light Body: Take equal parts of the light body material and catalyst. Mix them thoroughly according to the manufacturer’s instructions.

• Light Body Application: Dispense the mixed light body material directly onto the set putty impression, covering all areas evenly to capture fine details.

• Final Impression: Seat the impression tray back onto the patient’s teeth, ensuring all necessary areas are covered. Maintain a steady bite while the light body material sets.

• Final Removal: Carefully remove the impression tray from the patient’s mouth, ensuring the impression remains intact and undistorted.

• Modeling: Use the detailed impression to create a plaster model for further dental procedures, ensuring accurate results.

Warranty & Service

• Warranty is not applicable for this product