MDM Impression Composition

Description

MDM Primary impression compound is a thermoplastic material used for making preliminary impressions in edentulous patients. It softens when heated (around 55–60°C) and hardens at room temperature, allowing for accurate adaptation to oral tissues. This compound provides a stable, rigid impression after setting, making it ideal for initial denture fabrication. It is biocompatible, non-irritating, and reusable by reheating. Commonly used in  functional impressions, it ensures proper adaptation before making the final impression. Widely used in prosthodontics, the primary impression compound is essential for creating a precise foundation for complete dentures and other removable prosthetics. 

INDICATION

• Primary impressions: Initial impression of the mouth for study models, opposing models, or denture fabrication.
• Custom tray fabrication: As a material for creating custom impression trays

Key Features

• Thermoplastic Material – Softens when heated (55–60°C) and hardens at room temperature.
• Rigid & Stable – Provides a firm impression after setting, ensuring accuracy.
• Good Adaptability – Can be molded multiple times by reheating.
• Non-Irritating & Biocompatible – Safe for oral tissues.
• High Flow When Heated – Ensures proper adaptation to the oral structures.
• Used for Edentulous Impressions – Ideal for primary impressions before denture fabrication.

Specifications

• Material: Thermoplastic impression material.
• Softening Temperature: Around 55–60°C (easily moldable when heated).
• Setting Property: Hardens at room temperature, becoming rigid and stable.
• Forms : Cakes for easy application.
• Usage: Used for primary impressions in edentulous patients
• Biocompatibility: Safe, non-toxic, and non-irritating for oral tissues.
• Weight: 200gm

Packaging

• Pack of 5 Cakes

Directions for Use

• Preparation:

  • Select the appropriate compound: Choose the right type of impression compound based on the patient’s needs (working and setting temperature).
  • Heat the compound: Using a flame or water bath, heat the impression compound until it becomes soft and pliable. The material should be malleable but not too hot to burn the patient.

• Loading the Tray:

  • Fill the impression tray: Load the softened compound into a suitable impression tray. Ensure that the tray is filled evenly, covering the entire surface area of the tray, and leave a slight excess to ensure a complete impression.

• Taking the Impression:

  • Place the tray in the patient’s mouth: Gently place the tray in the patient’s mouth and press it into place, making sure it conforms to the dental arch and captures the details of the gums and teeth.
  • Allow it to set: The compound will cool and harden as it contacts the oral tissues. This process usually takes a few minutes. During this time, keep the tray in place until the material has completely set.

• Removing the Impression:

  • Once the compound has solidified, carefully remove the impression tray from the patient’s mouth. The material will maintain its shape, capturing a clear imprint of the oral structures.
  • Inspect the impression: Check for any distortions or areas that may require additional material for a more accurate reproduction.

• Post-Impression Handling:

  • Disinfection: If necessary, disinfect the impression following your office’s infection control protocols.
  • Pouring the model: The impression can be used for making diagnostic or working models. Pour the impression with gypsum or another suitable material immediately after it is taken to avoid any dimensional changes.

• Cleaning the Equipment:

  • Clean any trays and tools used for handling the compound after use. The compound can be reused by reheating if necessary.

Additional Information

Country of Origin: India

Manufacturer:
MDM Corporation
3116, Kucha Pandit,Lal Kuan,Delhi
Phone: +91 72899 99456

Packer:
MDM Corporation
3116, Kucha Pandit,Lal Kuan,Delhi
Phone: +91 72899 99456

Marketed By:
MDM Corporation
3116, Kucha Pandit,Lal Kuan,Delhi
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product