Labodent Zirconia Dentin Coloring Liquid ST – D Shade Series (50ml)

Description

The Labodent Zirconia Coloring Liquid ST in the D Shade Series is a pre-sinter dyeing solution developed for the Super Translucent (ST) zirconia range, formulated to deliver the warm reddish-grey tonality characteristic of the Vita D shade family. Less commonly selected than the A series but essential for accurate full-spectrum shade matching, the D series fills the gap between the warmth of A shades and the cooler tones of the C series — making it the right choice for patients whose natural dentition carries a soft reddish-grey hue. Applied via dipping or brushing to pre-sintered milled restorations, the liquid penetrates uniformly through the zirconia structure, producing consistent in-depth shading after sintering. Compatible with most CAD/CAM zirconia discs and supplied in a practical 50 ml bottle, this coloring liquid completes the laboratory’s shade inventory for delivering truly individualized aesthetic restorations.

Key Features

• Pre-sinter coloring liquid formulated for Super Translucent (ST) zirconia restorations
• Reproduces the warm reddish-grey tonality of the Vita D shade series
• Essential for full-spectrum shade matching when neither A nor C series suits the patient
• Metal-oxide colorant system delivers deep uniform penetration throughout the restoration
• Maintains the natural translucency and light dynamics of high-translucency zirconia
• Supports both dipping and brushing application techniques for flexible workflow
• Compatible with most CAD/CAM milled pre-sintered zirconia discs and blocks
• Convenient 50 ml bottle size for routine economical D-shade case processing

Specifications

• Product Type: Zirconia Pre-Sinter Coloring Liquid
• Brand: Labodent
• Range: ST (Super Translucent)
• Shade Series: D (Vita D-range)
• Application Stage: Pre-sinter dipping
• Application Method: Dip or brush technique
• Compatibility: Most CAD/CAM milled pre-sintered zirconia
• Composition: Aqueous metal-oxide colorant system
• Net Quantity: 50 ml
• Storage: Cool dry place away from direct sunlight

Packaging

• 1 x 50ml Bottle

Directions for Use

Preparation

• Mill the restoration from the chosen ST zirconia disc on the CAD/CAM milling unit
• Carefully separate the milled crown or bridge from the disc without damaging the structure
• Clean the milled restoration to remove milling dust before coloring
• Shake the Labodent coloring liquid bottle gently to ensure uniform colorant distribution

Coloring Application

• Pour the required quantity into a clean glass or porcelain dipping container
• Immerse the milled restoration fully in the liquid for the recommended dipping time
• Remove the restoration carefully using clean tweezers without contaminating the bath
• Allow excess liquid to drip back into the container and gently absorb any pooled areas

Drying

• Place the colored restoration on a clean drying tray in a dust-free area
• Allow it to air dry fully until all surface moisture has evaporated
• Optionally use a drying lamp at low temperature to accelerate the drying process

Sintering

• Place the fully dried colored restoration in the sintering furnace as per standard protocol
• Follow the zirconia disc manufacturer’s recommended sintering schedule
• Allow the furnace to cool completely before removing the sintered restoration
• Inspect the final shade, finish, and glaze the restoration as required

Post Use Care

• Tightly seal the bottle immediately after use to prevent evaporation and contamination
• Store in a cool dry place away from direct sunlight and extreme temperatures
• Discard used liquid from the dipping container rather than returning it to the bottle
• Check the expiry date on the bottle before each use

Additional Information

Country of Origin: India

Manufacturer:
Vasa Denticity Limited
Dock No. IN7 & IN8, Shed 1, Pataudi Road, Near Adani Logistics Park, ICD Patli, Killa No. 14/2, Gurugram – 122503, Haryana, India
Phone: +91 72899 99456

Packer:
Vasa Denticity Limited
Dock No. IN7 & IN8, Shed 1, Pataudi Road, Near Adani Logistics Park, ICD Patli, Killa No. 14/2, Gurugram – 122503, Haryana, India
Phone: +91 72899 99456

Marketed By:
Vasa Denticity Limited
Dock No. IN7 & IN8, Shed 1, Pataudi Road, Near Adani Logistics Park, ICD Patli, Killa No. 14/2, Gurugram – 122503, Haryana, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product.