Labodent Zirconia Dentin Coloring Liquid ST 50ml-C1 Shade

Description

The Labodent Zirconia Coloring Liquid ST in the C Shade Series is a pre-sinter dyeing solution crafted for the Super Translucent (ST) zirconia range, formulated to deliver the cooler, slightly greyish tones characteristic of the Vita C shade family. Used in the dental laboratory before sintering, the liquid penetrates pre-sintered zirconia uniformly during a short dipping cycle, infusing the entire restoration with consistent C-range shading rather than just a surface tint. The balanced metal-oxide colorant system maintains the natural light transmission of high-translucency zirconia, making it especially useful for patients with cooler dentin tones, age-related shade darkening, or specific aesthetic case requirements where A-range warmth would not match. Compatible with most CAD/CAM milled zirconia discs and supplied in a convenient 50 ml bottle, this coloring liquid is a reliable choice for laboratories working across the full Vita shade spectrum.

Key Features

• Pre-sinter coloring liquid formulated for Super Translucent (ST) zirconia restorations
• Reproduces the cooler greyish tones of the Vita C shade series for natural lifelike results
• Suitable for cases with cooler dentin tones, aged dentition, or specific shade matching needs
• Balanced metal-oxide colorants ensure deep uniform penetration through the restoration
• Preserves the natural translucency and light dynamics of high-translucency zirconia
• Short pre-sinter dipping cycle integrates easily into the standard lab workflow
• Compatible with most CAD/CAM milled pre-sintered zirconia discs and blocks
• Practical 50 ml bottle size for economical routine C-shade case processing

Specifications

• Product Type: Zirconia Pre-Sinter Coloring Liquid
• Brand: Labodent
• Range: ST (Super Translucent)
• Shade Series: C (Vita C-range)
• Application Stage: Pre-sinter dipping
• Application Method: Dip or brush technique
• Compatibility: Most CAD/CAM milled pre-sintered zirconia
• Composition: Aqueous metal-oxide colorant system
• Net Quantity: 50 ml
• Storage: Cool dry place away from direct sunlight

Packaging

• 1 x 50ml Bottle

Directions for Use

Preparation

• Mill the restoration from the chosen ST zirconia disc on the CAD/CAM milling unit
• Carefully separate the milled crown or bridge from the disc without damaging the structure
• Clean the milled restoration to remove milling dust before coloring
• Shake the Labodent coloring liquid bottle gently to ensure uniform colorant distribution

Coloring Application

• Pour the required quantity into a clean glass or porcelain dipping container
• Immerse the milled restoration fully in the liquid for the recommended dipping time
• Remove the restoration carefully using clean tweezers without contaminating the bath
• Allow excess liquid to drip back into the container and gently absorb any pooled areas

Drying

• Place the colored restoration on a clean drying tray in a dust-free area
• Allow it to air dry fully until all surface moisture has evaporated
• Optionally use a drying lamp at low temperature to accelerate the drying process

Sintering

• Place the fully dried colored restoration in the sintering furnace as per standard protocol
• Follow the zirconia disc manufacturer’s recommended sintering schedule
• Allow the furnace to cool completely before removing the sintered restoration
• Inspect the final shade, finish, and glaze the restoration as required

Post Use Care

• Tightly seal the bottle immediately after use to prevent evaporation and contamination
• Store in a cool dry place away from direct sunlight and extreme temperatures
• Discard used liquid from the dipping container rather than returning it to the bottle
• Check the expiry date on the bottle before each use

Additional Information

Country of Origin: India

Manufacturer:
Vasa Denticity Limited
Dock No. IN7 & IN8, Shed 1, Pataudi Road, Near Adani Logistics Park, ICD Patli, Killa No. 14/2, Gurugram – 122503, Haryana, India
Phone: +91 72899 99456

Packer:
Vasa Denticity Limited
Dock No. IN7 & IN8, Shed 1, Pataudi Road, Near Adani Logistics Park, ICD Patli, Killa No. 14/2, Gurugram – 122503, Haryana, India
Phone: +91 72899 99456

Marketed By:
Vasa Denticity Limited
Dock No. IN7 & IN8, Shed 1, Pataudi Road, Near Adani Logistics Park, ICD Patli, Killa No. 14/2, Gurugram – 122503, Haryana, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product.