GC Caviton

Description

Hydraulic Temporary Restorative is a specialized dental material exclusively intended for temporary filling applications and is designed for use solely by trained dental professionals. The material is then carefully transferred to the cavity using an appropriate instrument, allowing the dental professional to shape and contour it to seamlessly blend with the natural tooth structure. In the case of occlusal Class I cavities, the patient is advised to bite down on the material, facilitating proper adaptation and contouring. Over a period of approximately 30 minutes, the hydraulic temporary restorative material hardens by absorbing moisture, resulting in a stable and durable temporary filling. When removing the filling, the dental professional should clean the cavity using an alcohol-soaked cotton pellet, thoroughly eliminating any residue or remnants of the temporary material.

INDICATIONS

• As a temporary filling material

CONTRAINDICATIONS

• In rare cases, the product may cause sensitivity in some people. If any such reactions are experienced, discontinue the use of the product and refer to a physician.

Key Features

• Setting initiated by water and saliva
• Excellent adaptability
• Easy to remove
• Ready-to-use paste: no mixing required
• Excellent marginal seal: prevents microleakage
• Non-eugenol formulation: compatible with resin-based materials

Specifications

STORAGE

• Recommended for optimal performance, store at temperature of
  4-25°C (39.2-77.0°F).
• Calcium sulfate (gypsum): 50%
• Zinc oxide: 30%
• Vinyl acetate resin: 20%

Packaging

• 1 x 30g Jar

Directions for Use

• Dry the prepared cavity with a small cotton pellet.
• Transfer the material to the cavity using a suitable instrument and form the contour. In the case of occlusal Class I cavities let the patient bite down on the surface, and then form the contour.
• Ask the patient to close his / her mouth. The filling will harden in about 30 minutes by absorbing moisture. Recommend the patient avoid pressure or abrasion for at least 1 hour.

Notes:

• Do not mix or contaminate with any other material.
• When removing the filling, clean the cavity with an alcohol-soaked cotton pellet.
• Close the jar immediately

Additional Information

Country of Origin: Japan

Manufacturer:
GC Corporation
76-1 Hasunuma-cho, Itabashi-ku, Tokyo, Japan

Packer:
GC Corporation
76-1 Hasunuma-cho, Itabashi-ku, Tokyo, Japan

Imported By:
M/s GC India Dental Pvt. Ltd.
233, Phase III, IDA Pashamylaram, Patancheru, Sangareddy, Telangana – 502307, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product