FerroChem Crack Check Non Aqueous Wet Developer Dental 3D Scan Spray (FC-811/2)

Description

FerroChem Crack Check Non Aqueous Wet Developer Dental 3D Scan Spray (FC-811/2) is a high-quality inspection tool designed for precise surface testing. Presented in a convenient white 500 ml aerosol can, each unit contains 420 ml of product combined with propellant, making it easy to apply. With a weight of approximately 408 grams, this developer is lightweight and user-friendly. One can effectively cover up to 9 square meters, ideal for inspecting large surfaces with ease. 

FC 811/2 stands out for its non-hazardous, non-toxic, and non-corrosive chemical composition, prioritizing user safety and environmental friendliness. It is engineered to deliver reliable performance, with a shelf life of up to two years from the date of manufacture when stored properly in its original packaging. This longevity ensures consistent availability and effectiveness for ongoing inspection needs. Whether for industrial maintenance or quality control, FerroChem Crack Check Non Aqueous Wet Developer FC 811/2 provides a dependable solution for detecting surface discontinuities, helping maintain the integrity of materials and structures without compromising on safety or ease of use.

Key Features

• Non-hazardous, non-toxic, and non-corrosive chemical composition.
• High coverage area: one can covers up to 9 square meters.
• Convenient 500 ml aerosol can with 420 ml of product and propellant.
• Lightweight design at approximately 408 grams per can.
• Long shelf life of two years from the date of manufacture when stored properly.
• Ensures precise and reliable detection of surface discontinuities.

Specifications

• Colour: White
• Aerosol Can Volume: 500 ml
• Net Content: 420 ml (Product + Propellant)
• Chemical Nature: Non-hazardous, Non-Toxic, Non-Corrosive Liquid

Packaging

• 1 x Crack Check Non Aqueous Wet Developer Dental 3D Scan Spray (FC-811/2)

Directions for Use

1. Preparation: Ensure the surface is clean, dry, and free from oil or debris before application.

2. Shake Well: Vigorously shake the aerosol can for 20–30 seconds to mix the developer properly.

3. Application: Hold the can 6–12 inches from the target surface and spray a uniform, light coat. Avoid oversaturating the area.

4. Drying: Allow the coating to dry for a few seconds to form a matte finish suitable for scanning or inspection.

5. Scanning/Inspection: Perform the 3D scan or surface inspection once the coating is stable and contrast is optimal.

6. Post-Use Care: After scanning, gently clean the surface with a soft cloth or compatible cleaning solution if needed. Store the spray in a cool, dry place.

Warranty & Service

• Warranty is not applicable for this product