Endoking ProphyEase Cordless Polishing System

Description

Key Features

Specifications

• Battery Capacity: 800mAh
• Adapter Voltage: 110-240V, 50/60Hz
• Speed Range: 500-3000rpm
• Operating Modes: 6 Modes
• Usage per Full charge: Up to 300 times
• Temperature: -30°C to 55°C
• Humidity: Less than 80%
• Atmospheric Pressure: 50 KPa to 106 KPa

Packaging

• 1 x Main Unit
• 1 x Charging base
• 1 x Contra Angle (4:1)
• 2 x Led Attachment 
• 2 x Wrench
• 1 x Adapter
• 1 x Chargine Cable
• 1 x Motor Cover
• 1 x Oil Nozzle
• 1 x User Manual

Directions for Use

• Charging the Device:
  > Ensure the device is fully charged before use by placing it on the charging base.
  > A low battery indicator will alert you when the battery is running low. Charge the unit as needed.
• Attaching the Prophy Angle:
  > Select a disposable prophy angle and securely attach it to the handpiece.
  > Ensure it is locked in place before operating.
• Powering On:
  > Press the Power On/Off button to turn the device on.
• Adjusting Speed:
  > Use the variable speed control to adjust the speed according to the procedure.
  > Lower speeds are recommended for sensitive areas, while higher speeds can be used for more extensive polishing.
• Starting and Stopping the Bur Rotation:
  > Press the start button to begin the rotation of the prophy angle.
  > To pause or stop the rotation, press the start button again.
• Polishing Procedure:
  > Gently apply the rotating prophy angle to the teeth for polishing, ensuring even pressure and movement across surfaces.
• After Use:
  > Turn the device off by pressing the Power On/Off button.
  > Remove and discard the disposable prophy angle. Wipe down the device with a disinfectant wipe for cleaning.
• Storage:
  > Store the device on the charging base to keep it ready for the next use.

Additional Information

Warranty & Service

• Manufacturer/Importer warranty of 1 year as applicable for the Main Motor and 1 year warranty for Contrangle this product including on PCB (Power Circuit Board)
• Service and Warranty are handled by the manufacturer/importer directly for this product
• Dentalkart will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
• Dentalkart and the Buyer acknowledge that the Products purchased/used are a subject matter of the original Manufacturer/Importer €™s warranties only
• Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Dentalkart may assist the customer in registering a request to get the Product replaced or serviced.
• The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.