ET Dental Implant Impression Trays (Pack of 10)

Description

The ET Dental Implant Impression tray are disposable trays with removable segment & can be used for taking impressions of all sections of the dental arches, regardless of their shape, as it is available in different sizes. The correct numbered segment for the clinical situation is removed to expose the implant zone precisely.

ET Dental Implant Impression Trays are highly impact-resistant, distortion-free, and compatible with a wide variety of dental impression materials. Perforations are designed to enhance consistent flow and retention. 

Key Features

• Strong, rigid distortion free plastic construction
• Anatomically designed
• Smooth edges for patient comfort
• Excellent retention for impression materials whilst providing sufficient pressure for all details
• Base sections can be easily removed with a bur for implant posts
• Reduced thickness trim lines on labial wall for easy removal in inclination post cases.

Specifications

• Perforated Implant Impression Trays
• Disposable trays
• Colour – Blue
• Material – Plastic

 10 Impression Trays :

• Upper (Small)
• Lower (Small)
• Upper (Medium)
• Lower (Medium)
• Upper (Large) 
• Lower (Large)
• Left Upper,Right Lower (Quadrant)
• Right Upper,Left Lower(Quadrant)
• Anterior Upper
• Anterior Lower

Packaging

• 1 x Implant Impression Trays (Pack of 10)

Directions for Use

• Place your open-tray impression coping on the implant you are planning to impress. Confirm its complete seating with a radiograph. There should not be a space at the junction of the implant and impression coping.
• Remove the corresponding section from the impression tray with the driver or bur.
• Try in the impression tray over the open-tray implant. Make sure that there is adequate space around the impression coping. If the impression coping is located between two sections, remove both.
• If the impression coping does not extend beyond the tray, the tray may be modified with wax. The impression coping must be accessible for removal of the open-tray (or pick-up) impression.
• There is no need to place adhesive into this impression tray. Undercuts are built into the tray, and the impression material will be secured to the tray through mechanical retention.
• Fill the impression tray with heavy-viscosity impression material and syringe light-viscosity impression material over the impression coping. Seat the tray. Allow the impression material to fully set, unscrew the impression coping, and retrieve your impression with your open-tray impression coping from the patient’s mouth.
• Remove the impression coping from the mouth and reposition it in the impression, checking that it relocates positively. There will usually be an audible or tactile “click”.
• Replace the healing abutment.

Additional Information

Country of Origin: China

Manufacturer:
Tribest Dental Products Co., Ltd.
No. 98, Zhongling Road, Sanmao Street, Yangzhong, Jiangsu, China

Packer:
Tribest Dental Products Co., Ltd.
No. 98, Zhongling Road, Sanmao Street, Yangzhong, Jiangsu, China

Imported & Marketed By:
Vasa Denticity Ltd.
Khasra No. 15/1, Mustil No. 6, Village Dabodha, Farrukhnagar, Gurugram, Haryana – 122506, India
Phone: +91 72899 99456