Dentaltech OneGuide Metal Sleeve ∅5.0mm Non-Threaded – Osstem Implant Compatible (Pack of 10)

Description

The Dentaltech OneGuide Metal Sleeve – Osstem Implant Compatible is a precision-engineered component designed to integrate into Osstem OneGuide surgical templates, providing accurate drill guidance during guided dental implant surgery. By housing the surgical drills at predetermined positions, angulations, and depths planned in the digital workflow, these sleeves translate the virtual surgical plan into precise clinical execution — minimizing deviation, reducing wear on guide material, and protecting the surrounding bone and soft tissue from accidental drill displacement. Available in three variants — Ø5.0 mm threaded, Ø5.0 mm non-threaded, and Ø5.7 mm — the range covers different drill diameters and template integration methods used across the Osstem OneGuide system. Precision-machined with smooth internal walls and tight dimensional tolerances, each sleeve ensures consistent drill rotation and stable guidance. Supplied as a pack of 10 for routine guided implant case processing.

Key Features

• Engineered for direct compatibility with Osstem OneGuide surgical templates
• Provides accurate drill guidance during guided dental implant surgery
• Translates the digital surgical plan into precise clinical execution at the chairside
• Available in Ø5.0mm threaded, Ø5.0mm non-threaded, and Ø5.7mm variants for case flexibility
• Precision-machined with tight dimensional tolerances for consistent drill control
• Smooth internal walls allow consistent drill rotation and reduced friction during osteotomy
• Protects template material from drill wear and prevents accidental drill displacement
• Supplied as a pack of 10 for routine guided implant case workflows

Specifications

• Product Type: Surgical Guide Metal Sleeve
• Brand: Dentaltech
• Compatibility: Osstem OneGuide surgical template system
• Available Variants: Ø5.0mm threaded, Ø5.0mm non-threaded, Ø5.7mm
• Application: Guided implant surgery drill guidance
• Integration: Threaded or non-threaded fit into surgical template
• Pack Size: 10 sleeves per pack
• Sterilization: Autoclavable

Packaging

• Pack of 10

Directions for Use

Pre-Surgical Planning

• Complete the implant case planning using CBCT and the Osstem OneGuide planning software
• Design the surgical template with the required metal sleeve positions for each planned implant site
• Select the appropriate sleeve variant (Ø5.0mm threaded, Ø5.0mm non-threaded, or Ø5.7mm) for each drill stage

Sleeve Integration into Guide

• For threaded variants, screw the sleeve into the corresponding threaded port in the surgical guide
• For non-threaded variants, press-fit or resin-bond the sleeve into the corresponding port in the guide
• Verify each sleeve sits flush and stable in the template at the planned position and angulation

Sterilization and Setup

• Sterilize the complete surgical guide with embedded sleeves as per the guide manufacturer’s protocol
• Confirm sleeve stability after sterilization before placing on the patient
• Set up the implant motor, drills, and surgical kit aligned with the planned protocol

Surgical Use

• Seat the surgical guide on the patient’s dentition or supporting structure following the planned protocol
• Insert the appropriate implant drill through the sleeve and begin osteotomy at the planned trajectory
• Allow the sleeve to constrain the drill’s position, angle, and depth as planned in the digital workflow
• Use copious saline irrigation throughout drilling to keep both drill and bone cooled
• Progress through the planned drill sequence using sleeves matched to each drill diameter
• Remove the surgical guide once osteotomy preparation is complete and proceed with implant placement

Post Use Care

• Clean and inspect the metal sleeves after the procedure for wear or internal damage
• Discard sleeves showing significant internal wear or rotational deformation
• Store unused sleeves in their original packaging in a clean dry environment

Additional Information

Country of Origin: India

Manufacturer:
Kamal Encon Industries Limited
Plot No. 917, IMT Faridabad, Sector 68, Faridabad , 121001, India
Phone: +91 72899 99456

Packer:
Kamal Encon Industries Limited
Plot No. 917, IMT Faridabad, Sector 68, Faridabad,121001, India
Phone: +91 72899 99456

Marketed By:
Vasa Denticity Ltd.
Khasra No. 15/1, Mustil No. 6, Village Dabodha, Farrukhnagar, Gurugram, Haryana , 122506, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product.