Dentaltech Nobel Compatible Ti Base – NP – Non Hex

Description

Dentaltech Nobel Compatible Ti Base – NP – Non Hex is a precision-engineered titanium abutment designed for narrow platform Nobel Biocare implant systems. Manufactured from biocompatible Grade 5 titanium, it serves as the foundational link between the implant and the final restoration, enabling accurate, durable, and aesthetic prosthetic outcomes. Its precision-machined Nobel-compatible interface ensures a passive, secure fit with minimal microgap, while the grit-blasted bonding surface provides optimal retention for cemented zirconia or hybrid superstructures. T his Ti Base streamlines the digital workflow from intraoral scanning through lab design and final delivery.

Key Features

• High-precision titanium machining for accurate implant fit
• Strong titanium-to-titanium connection for long-term stability
• Supports screw-retained, retrievable prosthetic designs
• Optimized for CAD/CAM digital workflows
• Suitable for multi- unit bridges

Specifications

• Material:  Grade 5 Titanium 
• Compatibility: Nobel Biocare Narrow Platform (NP)
• Upper Diameter: 2 mm
• Full Lenght: 7.5 mm
• Upper Length: 4.8 mm
• Sterilization: Autoclavable
• Connection Type: Non-Hex connection

Packaging

• 1 x Dentaltech Nobel Compatible Ti Base – NP – Non Hex
• 1 x Screw

Directions for Use

1. Digital Impression

• Position the implant-specific scan body on the fixture or master cast analogue.
• Capture the implant position using an intra-oral or laboratory desktop scanner.
• Alternatively, take a pick-up impression with an implant-level transfer coping and pour a cast with a laboratory analogue.

2. Restoration Design and Fabrication

• Design the restoration in CAD software
• Maintain a minimum abutment sleeve height of 4 mm for adequate bonding surface.
• Mill in zirconia, lithium disilicate or hybrid ceramic.

3. Extra-Oral Cementation

• Lute the restoration to the Ti Base using a dual-cure hybrid-abutment resin cement
• Seat under uniform digital pressure, remove excess cement, and photopolymerise for recommended time.
• Obturate the screw access channel with PTFE tape and polish the crown-to-Ti Base junction.

4. Intra-Oral Delivery

• Remove the healing abutment and irrigate the implant well with sterile saline.
• Seat the bonded assembly and confirm complete passive seating radiographically.
• Insert the prosthetic screw and hand-tighten before final torquing.

5. Torque Application

• Apply torque with a calibrated torque wrench per the implant manufacturer’s specification.

6. Screw Access Closure

• Insert PTFE tape into the screw access channel to protect the screw head.
• Seal the coronal two millimetres with a light-cured composite resin.
• Verify occlusal contacts in centric and excursive movements; adjust and polish.

Additional Information

Country of Origin: India

Manufacturer:
Kamal Encon Industries Limited
Plot No. 917, IMT Faridabad, Sector 68, Faridabad , 121001, India
Phone: +91 72899 99456

Packer:
Kamal Encon Industries Limited
Plot No. 917, IMT Faridabad, Sector 68, Faridabad,121001, India
Phone: +91 72899 99456

Marketed By:
Vasa Denticity Ltd.
Khasra No. 15/1, Mustil No. 6, Village Dabodha, Farrukhnagar, Gurugram, Haryana , 122506, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product.