DentalPlant Dio-UFII Regular | Wide Compatible SmartPeg – 2.5mm Hex

Description

DentalPlant Dio-UFII Regular | Wide Compatible SmartPeg – 2.5mm Hex is a precision diagnostic component engineered to deliver reliable Implant Stability Quotient (ISQ) readings via resonance frequency analysis. Specifically made for Dio-UFII Regular and Wide implant platforms, this SmartPeg features a 2.5mm hex connection for secure handling and firm seating. Manufactured from anodized aluminum, it offers lightweight construction with excellent dimensional stability to avoid measurement interference. The SmartPeg’s engineered thread and V-type geometry ensure consistent, repeatable resonance coupling for clinicians to assess primary stability and monitor osseointegration. Easy to attach, measure, and remove, it streamlines implant follow-up workflows and supports evidence-based decisions for implant loading and restorative timing

Key Features

• Designed for Dio-UFII Regular and Wide platforms
• Accurate and reproducible ISQ measurements
• Lightweight anodized aluminum construction
• Secure threaded fit reduces measurement variability
• 2.5 mm hex for stable handling and torque control
• Compatible with major RFA analyzers
• Quick attachment and effortless removal chairside
• Helps guide evidence based implant loading decisions

Specifications

• Compatibility: Dio-UFII implants
• Connection: 2.5 mm hex
• Variants: Regular & Wide
• Material: Anodized aluminum
• Compatibility: compatible with DentalPlant Implant Stability Tester

Packaging

1 x DentalPlant Dio-UFII Regular | Wide Compatible SmartPeg – 2.5mm Hex

Note: Click here to buy Compatible DentalPlant Implant Stability Tester

Directions for Use

Selection

• Confirm implant system is Dio-UFII Regular or Wide
• Choose the matching SmartPeg variant for implant diameter
• Inspect packaging to ensure sterility and integrity

Preparation

• Prepare the operative field and remove saliva and blood from implant site
• Calibrate the resonance frequency analyzer (RFA) per device instructions
• Have the appropriate hex driver ready for gentle seating

Attachment

• Screw the SmartPeg into the implant connection by hand until seated
• Use the 2.5 mm hex driver if needed to secure gently without overtightening
• Ensure the SmartPeg is upright and stable for accurate coupling

Measurement

• Position the RFA probe near the SmartPeg without touching it
• Record ISQ values from at least two orthogonal directions for consistency
• Document readings and compare with baseline or clinical thresholds

Removal

• Unscrew the SmartPeg carefully after measurements are recorded
• Wipe or clean off debris then follow sterilization or disposal protocol
• Store reusable SmartPegs per manufacturer guidance to preserve accuracy

Sterilization & Storage

• Follow recommended cleaning and sterilization procedures for the SmartPeg type
• Do not autoclave single-use items intended for single patient use
• Store in protective packaging away from contaminants and moisture

Additional Information

Warranty & Service

• Warranty is not applicable for this product