D-Tech Compo-Flo Flowable Composite Refills

Description

D-Tech Compo-Flo Flowable Composite is a light-curing, radiopaque nano-hybrid flowable composite engineered for precise, minimally invasive restorative procedures. With optimized thixotropy it delivers controlled flow without slumping, allowing accurate placement in Class III-V restorations, cavity liners, undercut block-out and minimally invasive preparations. The formulation combines methacrylate monomers, inorganic fillers and photoinitiators to provide high strength, excellent wear resistance, low polymerization shrinkage and superior polishability. Compo-Flo cures reliably with standard dental lights (20 seconds per ?2 mm increment), offers dependable depth of cure, and is supplied in 2 g screw syringes with applicator tips. Available in a wide shade range (including A1, A2, A3) for predictable aesthetic matching in both anterior and posterior indications.

Key Features

• High compressive strength
• High flexural strength
• Low polymerisation shrinkage
• Optimal thixotropy, non-slumping
• Excellent polishability and aesthetics
• Radiopaque for clear diagnosis
• High depth of cure (meets standards)
• Non-sticky, easy to sculpt
• Supplied in 2 g screw syringe
• Includes angled Luer-lock applicator tips

Specifications

• Product Type: Flowable composite
• Material: Nano-hybrid resin
• Shade Options: A1, A2, A3
• Packaging: 2 g syringe
• Accessories: 2 tips
• Curing Time: 20 s / layer
• Layer Thickness: ? 2 mm
• Radiopacity: Yes
• Shelf Life: 2 years
• Main Ingredients: Methacrylates, fillers
• Viscosity: Thixotropic, non-sag
• Sensitivity: Avoid uncured contact

Packaging

D-Tech Compo-Flo Flowable Composite Refills

• 1 x 2g Compoflo Syringe
• 1 x 2nos Applicator tips

Directions for Use

Preparation

• Verify product shade and expiry before use; store in cool, dark place.
• Isolate the field with rubber dam or cotton rolls to maintain dryness.
• Remove caries and unsupported enamel; rinse and gently blot dry (do not desiccate dentin).
• Protect deep cavities with an appropriate liner or base if indicated.
• Etch enamel margins with appropriate etchant (20-35 s), rinse and dry with oil-free air.
• Apply compatible bonding agent per manufacturer instructions and light cure as directed.

Application

• Attach angled Luer-lock tip to the 2 g syringe; prime by gently pressing the plunger.
• Place Compo-Flo in increments not exceeding 2 mm to ensure complete cure.
• Seat and adapt material using appropriate composite instruments; material is non-sticky and easy to sculpt.
• Cure each increment with a calibrated curing light for 20 seconds, keeping the light tip as close as possible to the surface.
• For thin liners or base use, ensure material coverage is continuous and avoid voids.

Post-Use Care

• Remove excess flash and adjust occlusion after final cure using fine diamonds and finishing instruments.
• Polish with progressively finer discs and polishing pastes to achieve high gloss and smooth margins.
• Instruct patient on routine oral care and advise on avoiding hard foods for a short time if needed.
• Dispose of used syringe tips; re-cap syringe and store per storage instructions.

Sterilization Info

• Product syringes and tips are single-patient / single-use items, dispose after use or follow clinic infection control policy.
• Do not autoclave syringes or composite material containers; keep material away from heat and direct light.
• Clean and disinfect operatory surfaces and reusable instruments per clinic protocols.

Precautions & Contraindications

• Do not use in patients with known methacrylate allergy.
• Avoid direct placement on open pulp.
• Avoid soft tissue contact with uncured material; if contact occurs wash with soap and water.
• Use protective gloves and minimize exposure to uncured material to reduce allergic risk.
• Keep away from eugenol-containing materials and oily contaminants that may inhibit cure.

Additional Information

Country of Origin: India

Manufacturer:
D Tech Dental Technologies
Plot No. 118/119, Sub Plot No. 32, Lane No. 7, Ramtekdi Industrial Estate, Hadapsar, Pune – 411028, Maharashtra, India
Phone: +91 72899 99456

Packer:
D Tech Dental Technologies
Plot No. 118/119, Sub Plot No. 32, Lane No. 7, Ramtekdi Industrial Estate, Hadapsar, Pune – 411028, Maharashtra, India
Phone: +91 72899 99456

Marketed By:
D Tech Dental Technologies
Plot No. 118/119, Sub Plot No. 32, Lane No. 7, Ramtekdi Industrial Estate, Hadapsar, Pune – 411028, Maharashtra, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product